- Inconel 718 Valve
- Inconel 718 Flange
- Inconel 718 pipe fitting
- Inconel 718 angle bar
- Inconel 718 pipe
Inconel 718
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
Chemical composition % of the ladle analysis of grade Inconel 718 and Standards
Carbon
--
0.08
Manganese
--
0.35
Silicon
--
0.35
Phosphorus
--
0.015
Sulfur
--
0.015
Nickel + Cobalt
50.0
55.0
Chromium
17.0
21.0
Cobalt
--
1.00
Iron
Balance
Aluminum
0.35
0.80
Molybdenum
2.80
3.30
Titanium
0.65
1.15
Boron
0.001
0.006
Copper
--
0.15
Cb + Ta
4.75
5.50
--------------------------------------------------------------------------------
Machining performance
Inconel 718 the mechanical properties of the report, the report provides detailed performance analysis and application.
--------------------------------------------------------------------------------
Principal Design Features
One of the most widely used precipitation hardening grades in the business. While soft and ductile in the solution annealed condition, it is capable of high properties with a single precipitation or aging treatment. Characterized by good corrosion resistance, high harness, toughness and strength.
--------------------------------------------------------------------------------
Machinability
Long, gummy chips characterize this alloys machinability. It can be machined in the annealed condition, however condition H1150M will yield best results. Post machining solution treatment of parts will be required prior to final hardening if machining in this condition.
--------------------------------------------------------------------------------
Heat Treatment
CONDITION A--Soak at 1900 F (1038 C) for 30 minutes and cool below 60 F (16 C) for complete martensite transformation. CONDITION H 950- Treat Condition A material at 900 F(482 C) for 1 hour, air cool.. CONDITION H925, H1025, H1075, H1100, H1150- Soak solution treated material for 4 hours at specified temperature, air cool, CONDITION H1150M- Soak solution treated material at 1400 F (760 C) for 2 hours, air cool, then re-heat to 1150 F (620 C) for 4 hours and air cool.
--------------------------------------------------------------------------------
Welding
Successfully welded by common fusion and resistance methods, this alloy should not be joined by oxyacetylene welding. AWS E/ER630 filler metal is recommended if required.
--------------------------------------------------------------------------------
Forging
Soak for 1 hour at 2150 F (1177 C) prior to forging. Do not work below 1850 F (1010 C). Post-work solution treatment is required prior to final hardening.
--------------------------------------------------------------------------------
Hot tags:Inconel 718 tube plate, Inconel 718 Pipe Fitting, Inconel 718 flange, Inconel 718 Angle Bar,Inconel 718 Valve,Inconel 718 forgings
Related hot word search:Inconel 718 Valve Inconel 718,forging Inconel 718,Inconel 718 tube sheet,elbow Inconel 718,Inconel 718 flat bar,pipe Inconel 718,Inconel 718 Tee
Prev:AWS A5.9 ER2594
Next:Inconel 713C