No Fumigate or Fumigate Plywood/Wood Pallet or Case
2 - 15 days after confirmation
Stainless Steel Lap Joint Flange
Standard: ANSI, DIN
Size: DN15 - DN2000
PRESSURE; 150BLS - 2500BLS
Description Of Din Pn10 Stainless Steel Lap Joint Flange
LAP JOINT FLANGES (LJ Flanges)or Loose flange (LF flange) called are used on piping fitted with lapped pipe or with lap joint stub ends the combined initial cost of the two items being approximately one - third higher than that of comparable welding neck flanges. Their pressure - holding ability is little, if any, better than that of slip - on flanges and the fatigue life of the assembly is only one - tenth that of welding neck flanges. The lap joint flange with the stub end assembly are normally used in systems requiring frequent dismantling for inspection and cleaning and where the ability to swivel flanges and to align bolt holes materially eases the erection of large diameter or unusually stiff piping. Lap Joint flanges have certain special advantages: Freedom to swivel around the pipe facilitates the lining up of opposing flange bolt holes.Lack of contact with the fluid in the pipe often permits the use of inexpensive carbon steel flanges with corrosion resistant pipe. In systems which erode or corrode quickly, the flanges may be salvaged for re - use.
Type: Din Pn10 Stainless Steel Lap Joint Flange
Material: Stainless Steel: F304 F304L F316 F316L 316Ti, Copper etc.