Name: TP304/TP316L Seamless Stainless Steel Sanitary Tubing For Food Using
Place of Origin:Zhejiang, China (Mainland) Brand Name: Yaang
Shape: Stainless Steel Sanitary Tubing Material: Stainless Steel
Steel Grade: TP304/TP304L/TP316L/TP304H/TP347H ...
Packaging & Delivery
|Packaging Detail:||according to customer's require or export's standard|
|Delivery Detail:||2 - 15 days after confirmation|
Stainless Steel Sanitary tubes
1.Standard: ASTM A270 & DIN11850:
3.Size: OD 10mm to 89mm.
Thickness: from 0.25 - 3.0mm, Other specificatio.ns are welcome from your request.
4.Finishing: annealed, pickled, polished inside and outside
grit: : 180#, 320#, 400#, 600#, Mirror, bright, etc.
5.Packaging: each in a plastic bag, several in weaving bag
6.Application: widely used in sewerage disposal, decoration, food, beverage, milk, refine sugar, medicine, etc
|Application:||Widely Used In Sewerage Disposal, Decoration, Food, Beverage, Milk, Refine Sugar, Medicine, Etc||Grit:||180#, 320#, 400#, 600#, Mirror, bright, etc.|
|Material Grade:||TP304/TP304L/TP316L/TP304H/TP347H||Outer Diameter:||10mm - 89mm|
|Standard:||ASTM A270 & DIN11850||Surface Finishing:||Annealed, Pickled, Polished Inside And Outside|
|Type:||Stainless Steel Sanitary Tube/Tubing||Wall Thickness:||0.25 - 3.0mm|
Stainless Steel Pipe:
1.Material: TP304/304L, TP316/316L, TP304H, TP347H, TP317/317L, TP321/321H, TP310/310S ETC
2.O.D: 10mm - 89mm, Thickness: 0.25 - 3mm
3.A999/A999M: Each pipe shall be subjected to the nondestructive electric test or the hydrostatic test, the Thpe of test to be used shall be at the option of the mfg, unless otherwise specified in the PO.
4. The Pipe lengths : Unless otherwise agreed upon, all size from NPS 1/8” TO AND INCLUDING nps 8 are available in a length up to 24ft with the permitted range of 15 to 24 ft. Short length are acceptable and the number and min, length shall be agreed upon between mfg and purchaser.
5. The finished pipe shall be reasonably straight and shall have workmanlike finish, Removal of imperfections by grinding is permitted, provided the W.T are not decreased to the lenss than the permitted in Section 9 of Specification A999/A999M
6. Butt Weld End: According to ANSI B 16.25
7.PipeMarking: Specified in A999/999M, include “ Logo+Standard+SIZE+Heat No.+Lot No.+H.T/E.T/U.T”
If any inquiry about products, please feel free to contact us email@example.com