Ξ

News

Credibility ,
the lifeblood of enterprise!
Your Location: Home > News
News - Yaang

ASME/ANSI B16.5-1996 and B16.47-1996

DataTime:[2014-5-20]

ASME/ANSI B16.5-1996 and B16.47-1996

Tolerances on flange dimensions (ASME/ANSI B16.5 and B16.7, and MSS SP-44)

Dimension

Range

Tolerance

in

mm

General and Blind Flanges(For blind flange dimendions see page 8-23 for
B16.5, page8-46 for B16.47 Series A/ MSS SP-44 and page 8-51 for B16.47 
Series B/ API 605):

G(raised face
 diameter)

≤NPS 24

±0.03

±0.76

≥NPS 26,with
0.06 in raised face

±0.08

±2.03

≥NPS 26,with
0.25 in raised face

±0.04

±1.02

I(bolt hole diameter)

All

No tolerance in B16.5 or B 16.47

J(bolt circle diameter)

All

±0.06

±1.52

Center to center of 
adjacent bolt holes

All

±0.03

±0.76

Eccenticity of bolt 
circle and machined facing diameters

≤NPS 2½

±0.03

±0.76

≥NPS 3

±0.06

±1.52

Weld Neck Flanges1 (For dimensions see page 8-10 for B 16.5, page 8-46 for 
B16.47 Series A/ MSS SP-44 and page 8-51 for B16.47 Series B/ API 605):

D(overall length)

≤NPS 4

﹢0.06

﹢1.52

NPS 5 to 10

﹢0.06,﹣0.12

﹢1.52,﹣3.05

NPS 12 to 24

﹢0.12,﹣0.18

﹢3.05,﹣4.57

≥NPS 26

±0.19

±4.83

Thickness of hub

All

>87.5% of pipe nominal wall thickness

Slip on(see page 8-17),Lap Joint(see page8-32) and Socket Welding(see page
8-30 for dimensions) Flanges:

B(inside diameter,or
bore)

≤NPS10

﹢0.03,﹣0.0

﹢0.76,﹣0.0

≥NPS12

﹢0.06,﹣0.0

﹢1.52,﹣0.0

Threaded Flanges (see page 8-40 for dimensions):

B(counterbore)
(Not applicable for
Class 150 lb

≤NPS10

﹢0.03,﹣0.0

﹢0.76,﹣0.0

≥NPS12

﹢0.06,﹣0.0

﹢1.52,﹣0.0

Tel No:+86-18267732328 / Email:[email protected]
Address:Longwan District, Wenzhou, Zhejiang Province, China.

Copyright Notice © www.yaang.com Yaang Pipe Industry Co., Limited All rights reserved.
Yaang Pipe Industry Co., Ltd. is an international supplier of piping solutions for flange, butt welding fittings, socket welding fittings and threaded fittings. Our products are widely used in different industrial fields, including oil and gas, chemical industry, petrochemical industry, power plant, pulp and paper industry, environmental and water conservancy engineering, engineering projects, etc.