PRODUCTS
Credibility ,ASME B16.5 ASTM A182 316L Threaded Flange NPT RF 4 Inch CL150
ASME B16.5 ASTM B564 Inconel 718 Blind Flange 4 Inch Class150
ASME B16.5 ASTM B564 ALLOY 400 Slip On Flange RF 5 Inch CL300
ANSI B16.9 ASTM B363 GR.WPT2 SMLS 90 Deg LR Elbow 2 Inch Sch40S
ASME B16.9 ASTM B366 Inconel 751 Concentric Reducer 12 Inch x 8 Inch SCH10S
ASME B16.9 ASTM B366 Hastelloy Alloy C22 90 Degree 3D Bend DN100 SCH160S
MSS SP-43 type A ASTM B366 Alloy 601 Butt Welded Stub End 4 Inch SCH40S
ASME B16.9 ASTM B366 Alloy 600 90 Degree LR Elbow 2-1/2 Inch SCH10S
ASME B16.9 ASTM B366 Alloy 400 90 Degree LR Elbow 1-1/2 Inch SCH10S
ASME B16.9 ASTM B366 Incoloy 825 SMLS 45 Degree LR Elbow 2-1/2 Inch SCH40S
ASME B16.9 ASTM B366 UNS N10276 Hastelloy C276 Equal Tee 1-1/4 Inch SCH10S
ASME B16.9 ASTM B366 Alloy 20 60 Degree Long Radius Elbow 2 1/2 Inch SCH40S
ANSI B16.5 ASTM B564 Nickel Alloy 200/201 WN RF Flange 8 Inch SCH80S CL600
Quick Detail:
Name: UNS 32304 Seamless Duplex Stainless Steel Pipe 1.4362 OD 6MM - 710MM
Place of Origin:Zhejiang, China (Mainland) Brand Name: Yaang
Shape: Duplex Stainless Steel Pipe Material: Duplex Stainless Steel
Steel Grade: S31803/S31500/S32750 ...
Packaging & Delivery
Packaging Detail: | according to customer's require or export's standard |
Delivery Detail: | 2 - 15 days after confirmation |
Specifications:
Seamless Duplex Stainless Steel Pipe
1 Standard: ASTM A790/A789 PICKLED AND ANEANLED
2 Material: S31803/S31500/S32750 etc
3 OD: 6MM - - - 710MM
Thickness: 2.5mm - - - 50mm
4 Producing method: cold drawn and cold rolled
We offer an extensive range of Seamless Pipes to our clients. We also deal with super duplex pipes. Our Seamless Duplex Stainless Steel Pipe was width used in Mining, Energy, Petrochemical, Chemical Industry, Food plant, Paper plant, Gas and Fluid Industry etc
Characteristic: | High Mechanical Strength, Good Weldability, Good Corrosion Resistance, Low Thermal Expansion |
Material Grade: | S31803/S31500/S32750 Etc |
Outer Diameter: | 6mm - 710mm | Producing Method: | Cold Drawn And Cold Rolled |
Standard: | ASTM A790/A789 | Surface Finish: | Pickled And Aneanled |
Type: | Duplex Stainless Steel Pipe/Tube | Wall Thickness: | 2.5mm - 50mm |
Stainless Steel Pipe:
1.Material: S31803/S31500/S32750 ETC
2.O.D: 6mm - 710mm, Thickness: 2.5 - 50mm
3.A999/A999M: Each pipe shall be subjected to the nondestructive electric test or the hydrostatic test, the Thpe of test to be used shall be at the option of the mfg, unless otherwise specified in the PO.
4. The Pipe lengths : Unless otherwise agreed upon, all size from NPS 1/8” TO AND INCLUDING nps 8 are available in a length up to 24ft with the permitted range of 15 to 24 ft. Short length are acceptable and the number and min, length shall be agreed upon between mfg and purchaser.
5. The finished pipe shall be reasonably straight and shall have workmanlike finish, Removal of imperfections by grinding is permitted, provided the W.T are not decreased to the lenss than the permitted in Section 9 of Specification A999/A999M
6. Butt Weld End: According to ANSI B 16.25
7. Pipe Marking: Specified in A999/999M, include “ Logo+Standard+SIZE+Heat No.+Lot No.+H.T/E.T/U.T”
8. Packing: Each Pipe end is protected by Plastic cap. Then packed by Anti - rust steel strip, The outside of the bundle is plastic woven bag, or Plastic film.
9. Packing Mark: SIZE + STEEL GRADE+ QTY OF PIECE/WEIGHT/METRE.
Chemical Composition (%)
Alloy |
2304 |
UNS Designation |
S32304 |
Carbon (C) max. |
0.030 |
Manganese (Mn) max. |
2.50 |
Phosphorus (P) max. |
0.040 |
Sulfur (S) max. |
0.030 |
Silicon (Si) max. |
1.00 |
Chromium (Cr) |
21.5 - 24.5 |
Nickel (Ni) |
3.0 - 5.5 |
Molybdenum (Mo) |
0.05 - 0.60 |
Nitrogen (N) |
0.05 - 0.20 |
Copper (Cu) |
0.05 - 0.60 |
Iron (Fe) |
Balance |
Characteristic properties
• High mechanical strength
• Good weldability
• Good corrosion resistance
• High resistance to Stress Corrosion Cracking (SCC)
• Good machinability
• Very good wear and abrasive resistance
• Low thermal expansion
• Good fatigue properties
• Temperature range - 40° C to 250° C
Size Available at BWSS
Pipes
• OD: 6 - 710.0 mm
• WT: 2.5 - 50 mm
• Lengths: up to 12 m
Heat exchanger tubes
• OD: 21.3 - 114.3 mm
• WT: 1.5 - 3.05 mm
• Lengths: up to 12 m
Applications
• Chloride containing environments
• Welded pipe systems within Pulp and Paper - , Chemical and Petrochemical - , Water Treatment Industries
• Transportation
• Architecture, Building and Construction
• Heat exchanger tubes
If any inquiry about products, please feel free to contact us sales@yaang.com
![]() |
![]() |
Tel No:+86-18267732328 / Fax No :86-0577-56809281 / Email:sales@yaang.com
Address:Longwan District, Wenzhou, Zhejiang Province, China.
Copyright Notice © Yaang.com Yaang Pipe Industry Co., Limited All rights reserved.