1. Material: Hastelloy C276 (UNS N10276)
2. Size: 2" (DN50)
3. Standard: ASTM B574
4. Pressure: 150#
Non-standard flange is usually used for customers’ special requirement. They indicate the application service , the data, the specification and the drawing . Then we produced the custom flanges according to their requirements.
A Non-Standard blind flange is a solid disk used to block off a pipeline or to create a stop. It is machined in the same manner as a regular flange with the mounting holes around the perimeter and the gasket sealing rings machined into the mating surface. The difference is that a Non-Standard blind flange has no opening to allow fluid to pass through. The Non-Standard blind flange can be inserted between two open flanges and used to block off the flow of liquid through a pipeline.
Without the Non-Standard blind flange it would be difficult to perform maintenance or repairs on a pipeline. The flow would need to be shut off at the nearest valve, which could be miles away from the repair area. Valves are also very expensive and are prone to sticking. The Non-Standard blind flange is a much more cost efficient way of sealing a pipe.
China Custom Flange Manufacturer Yaang supplies ASTM B574 Alloy C276 Blind Flange, RF, 2 Inch, 150LB, Non-Standard.