Product name：Cast Steel Gate Valve 150LB
Application: Industry, powerstations, flue gas purification plant, processing technology, gas supply, vapour facilities, recycling facilities, vacuum facilities, hot water, thermal oil applications, general plant manufacturing, etc.
Medium: Water, Oil, Gas, Acid,Steam, gases, hot water, thermal fluids, hot oil, process water, vacuum facilities, ammonia etc.
Size range: 2"-24"
Temperaute: ≤ 425℃
●Design Standard: API600 / BS1873
●Face To Face: ANSI B16.10
●Flange ends: ANSI B16.5
●Test & Inspection: API 598
Design of Disc
Gate vlaves with NPS>2 are of flexible wedge gate;Gate valves with NPS <2 are of solid wedge gate.
Body and Bonnet Connection
The body and bonnet of Class 150~Class 900 gate valves are usually bolted bonnet design.And Class 1500~Class 2500 gate valves are usually of pressurized seal design.
Gasket of Cover Flange
Carbon steel or stainless steel+flexible graphite combined gasket is used for Class 150 gate valve；Stainless steel+flexible graphite wounded gasket is used for Class 300 gate valve;Stainless steel+flexible graphite wounded gasket is used for Class 600 gate valve ,and ring joint gasket is also optional for Class 600 gate valve;Ring Joint gasket is used for Class 900 gate valve;Pressurized seal design is used for Class 1500~Class 2500 gate valve.
Hand wheel or gear box is usually used for gate valve actuation .Chain wheel and electric actuator can be also used for gate valve actuatuo if being requested by the customers.
Molded flexible graphite is used for packing material .PTFE or combined packing material can be also used if being requested by the customers .The internal surface of the stuffing box ,of which area is contacted with the packing,is of excellent finish(Ra 3.2um).The stem surface ,contacting with the packing,should be rolled and pressed after being precisely machined,so as to reach to the high finish and compactness(Ra 0.8um)and ensure the reliable tightness of the stem area.
Belleville Spring Loaded Packing Impacting System
If being requested by the customer ,the Belleville spring loaded packing impacting system can be adopted for enhancing the durability and reliablity of the packing seal.
Back Seating Design
All our gate valves have the back seating design.In most cases,the carbon steel gate valve is fitted with a renewable back seat.For stainless steel gate valve,the back seat is machined directly in the bonnet or is machined after welding .When the gate valve is at fully open position ,the sealing of the back seat can be very reliable .However ,as per the requirement of API600,it is not advisable to add or change packing by the mean of back seating when the valve is pressure containing.
For carbon steel gate valve ,the seat is usually forged steel.The sealing surface of the seat is spray welded with hard alloy specified by the customer.Welded seat is used for NPS<10 gate valves ,and welded on seat can be also optional if being requested by the customer.Welded on seat is used for NPS<10 carbon steel gate valves .for Stainless steel gate valve,intergral seat is usually adopted,or to weld hard alloy directly integrally.Threaded or welded on seat is also optional for stainless steel gate valve if being requested by the customer.
The stem is of integral forged design .The minimum diameter of the stem shall per the standard requirement .The connection of the stem and disc is T type .The strength of the connecting area is bigger than that of the T threaded part of the stem .The strength test if that area conforms to API 591.
Usually,the stem nut is made of ASTM A439 D2.It is also can be made of copper ally if being requested by the customer .For large sized gate valves (NPS 10 for Class 150,NPS 8 for Class 300,NPS 6 for Class 600,NPS 5 for Class 900),rolling bearing is fitted at the two sides of the stem nut in order to minimize the open and close torque of the gate valve.
Where can we find the high quality Cast Steel Gate Valve 150LB.
You can visit this website: www.yaang.com (Yaang Pipe Industry Co., Limited).
If any inquiry, please feel free to contact by email [email protected]
Tel No：+86-18267732328 / Email:[email protected]
Address：Longwan District, Wenzhou, Zhejiang Province, China.
Copyright Notice © www.yaang.com Yaang Pipe Industry Co., Limited All rights reserved.
Yaang Pipe Industry Co., Ltd. is an international supplier of piping solutions for flange, butt welding fittings, socket welding fittings and threaded fittings. Our products are widely used in different industrial fields, including oil and gas, chemical industry, petrochemical industry, power plant, pulp and paper industry, environmental and water conservancy engineering, engineering projects, etc.