• ASTM 11Q Valve
  • ASTM 11Q Flange
  • ASTM 11Q pipe fitting
  • ASTM 11Q angle bar
  • ASTM 11Q pipe
Super Duplex Stainless Steel Flanges | Stainless Steel Pipe Fittings | Duplex Stainless Steel Pipes | Stainless Steel Bars
Contact us: sales@yaang.com
Home > Alloy steel > ASTM 11Q

ASTM 11Q

ASTM 11Q angle bars, ASTM 11Q flanges, Pipe Fitting, Steel Pipe, Heat Exchanger and Reducer, Gasket, Tee, Pipe Fitting, Tube Plate, have all specifications. With many yeas production experience, strict control ASTM 11Q chemical composition and ASTM 11Q mechanical properties.

Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.

Angle bar: 1mm to 1300mm
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.

ASTM 11Q

Data Table for:Products: Alloy steel:ASTM 11Q

ASTM 11Q properties and heat treatment forged piece, Including ASTM 11Q application and specifications,Including ASTM 11Q tube plate, ASTM 11Q tube sheet, ASTM 11Q Pipe fittings, ASTM 11Q flat bar,ASTM 11Q Valve,ASTM 11Q forgings.

ASTM 11Q has the following specifications:

Valve:
Diameter : 1mm-1300mm

Steel pipe:
Size: OD: 9.5mm - 813mm WT: 0.8mm - 34mm Length: 1 - 13m, also can be customed.

Items

seamless pipe & tube, pipe & tube

Standard

ASTM, GB, DIN, AISI, etc

Outer Diameter

Round pipe9.5mm--813mm  

square

12.7x12.7--200X200mm 

rectangular

20X40--150X200mm

Thickness

0.8mm - 34mm

Length

5.8m,6m, or as customers' request

Tolerance

a) Outer Diameter:  +/- 0.2mm

b) Thickness: +/- 0.02mm

c) Length: +/- 5mm

Surface

180Grit, 320Grit, 400Grit Satin / Hairline

 

400Grit, 500Grit, 600Grit Mirror finish

Application

Widely used in petroleum, Foodstuff, chemical industry, construction, electric power, nuclear energy, biotechnology, machinery, papermaking, shipbuilding, boiler fields, etc

Pipe fitting:
Size: 1/8 inch - 80 inch (DN6 - DN2000) WT: Sch5s - Sch160XXS

Items

Elbow,Equal Tee,Reducer Tee,Concentric Reducer,Eccentric Reducer,Cap,etc

Standard

ASME

ANSI B16.9,ANSI B16.28,MSS-SP-75

 

DIN

DIN2605,DIN2615, DIN2616, DIN2617, DIN28011

 

SGP

JISB2313

 

EN

EN10253-1  EN10253-2

Material

ASME

A234 WPB,A234 WP1,A234 WP5,A234,WP9,

A234 WPB11,A234 WPB12,A234 WPB22,WP91,

A420,WPHY42,WPHY52,WPHY60,WPHY65,

WPHY70,WP304,WP304L,WP304H,WP316,

WP316L,WP321,WP347,WP347H

 

DIN

ST37.0,ST35.8,ST45.8,S235JR,P235GH,P265GH,

10CrMo910,15CrMo,12Cr1MoV

 

JIS

JIS G3454,STPG370,TPG410

Surface

Black paint/bright paint/Galvanized

Marking

As customer’s requirements

Flange:

Product Name Flange
Items Plate, Welding Neck, Slip on, Blind, Lap joint, Threaded Flange
Standard ANSI ANSI B16.5 ASME B16.47 series A/B
DIN DIN
GOST GOST 12820-80
EN EN1092-1:2002
JIS JIS B2220-2004, KS D3576, KS B6216 KS B1511-2007 JIS B2261; JIS B8210
BS BS4504 BS10 Table D/E
Material ANSI CS A105/SA 105NSS 304/304L, 316/316L Alloy Steel: WHPY45/52/65/80
DIN CS RST37.2;S235JR SS 304/304L,316/316L
GOST CS CT20;16MN;SS 304/304L,316/316L
EN CS RST37.2;S235JR;C22.8SS 304/304L,316/316L
JIS SS400,SF440 SS 304/304L, 316/316L
BS CSRST37.2;S235JR;C22.8;Q235SS 304/304L,316/316L
Pressure ANSI Class 150, 300, 600, 900, 1500 2500lbs
DIN PN6,PN10,PN16,PN25,PN40,PN64,PN100
GOST PN6,PN10,PN16,PN25
EN PN6,PN10,PN16,PN25,PN40,PN64,PN100
JIS 1K,2K,5K,10K,16K,20K,30K,40K
BS PN6,PN10,PN16,PN25,PN40,PN64,PN100
Size ANSI 1/2” – 60”
DIN DN15-DN2000
GOST DN15-DN1600
EN DN15-DN2000
JIS 15A-1500A
BS DN15-DN2000
Coating varnish, yellow paint, anti-rust oil, galvanizing etc
Usage Used for the connection of all kinds of pipeline.
to convey the water, steam, air, gas and oil

Lenth: Any lenth based on the customer's requirement.


Chemical composition % of the ladle analysis of grade ASTM 11Q and Standards

C
Si
Mn
P
S
Cr Ni
0.15-0.25 0.2-0.8 0.4-0.7 0.04 0.045 0.35 1.65-2.0
Mo Al Cu Nb Ti W Ce
0.2-0.3   0.5     0.1  



Machining performance

ASTM 11Q the mechanical properties of the report, the report provides detailed performance analysis and application.


Principal Design Features

One of the most widely used precipitation hardening grades in the business. While soft and ductile in the solution annealed condition, it is capable of high properties with a single precipitation or aging treatment. Characterized by good corrosion resistance, high harness, toughness and strength.


Machinability

Long, gummy chips characterize this alloys machinability. It can be machined in the annealed condition, however condition H1150M will yield best results. Post machining solution treatment of parts will be required prior to final hardening if machining in this condition.


Heat Treatment

CONDITION A--Soak at 1900 F (1038 C) for 30 minutes and cool below 60 F (16 C) for complete martensite transformation. CONDITION H 950- Treat Condition A material at 900 F(482 C) for 1 hour, air cool.. CONDITION H925, H1025, H1075, H1100, H1150- Soak solution treated material for 4 hours at specified temperature, air cool, CONDITION H1150M- Soak solution treated material at 1400 F (760 C) for 2 hours, air cool, then re-heat to 1150 F (620 C) for 4 hours and air cool.


Welding

Successfully welded by common fusion and resistance methods, this alloy should not be joined by oxyacetylene welding. AWS E/ER630 filler metal is recommended if required.


Forging

Soak for 1 hour at 2150 F (1177 C) prior to forging. Do not work below 1850 F (1010 C). Post-work solution treatment is required prior to final hardening.



Hot tags:ASTM 11Q steel plate, ASTM 11Q sheet, ASTM 11Q Pipe fittings, ASTM 11Q flat bar,ASTM 11Q Valve,ASTM 11Q heat exchanger parts


Related hot word search:ASTM 11Q Valve ASTM 11Q,forging ASTM 11Q,ASTM 11Q tube sheet,elbow ASTM 11Q,ASTM 11Q flat bar,pipe ASTM 11Q,ASTM 11Q Tee

Prev:ICI 4620
Next:ICI 4340