• ICI 6150 Valve
  • ICI 6150 Flange
  • ICI 6150 pipe fitting
  • ICI 6150 angle bar
  • ICI 6150 pipe
Super Duplex Stainless Steel Flanges | Stainless Steel Pipe Fittings | Duplex Stainless Steel Pipes | Stainless Steel Bars
Contact us: [email protected] | Whatsapp | 8618267732328
Home > Alloy steel > ICI 6150

ICI 6150

ICI 6150 angle bars, ICI 6150 flanges, Pipe Fitting, Steel Pipe, Heat Exchanger and Reducer, Gasket, Tee, Pipe Fitting, Tube Plate, have all specifications. With many yeas production experience, strict control ICI 6150 chemical composition and ICI 6150 mechanical properties.

Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.

Angle bar: 1mm to 1300mm
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.

ICI 6150

Data Table for:Products: Alloy steel:ICI 6150

ICI 6150 properties and heat treatment forged piece, Including ICI 6150 application and specifications, Including ICI 6150 tube plate, ICI 6150 tube sheet, ICI 6150 Pipe fittings, ICI 6150 flat bar,ICI 6150 Valve,ICI 6150 forgings.

ICI 6150 has the following specifications:

Chemical composition % of the ladle analysis of grade ICI 6150 and Standards

Cr Ni
0.45-0.55 0.2-0.8 0.65-0.95 0.04 0.045 0.8-1.1 0.5
Mo+W Al Cu Nb Ti Fe V
0.1   0.5       ≤0.15

Machining performance

ICI 6150 the mechanical properties of the report, the report provides detailed performance analysis and application.

Principal Design Features

One of the most widely used precipitation hardening grades in the business. While soft and ductile in the solution annealed condition, it is capable of high properties with a single precipitation or aging treatment. Characterized by good corrosion resistance, high harness, toughness and strength.


Long, gummy chips characterize this alloys machinability. It can be machined in the annealed condition, however condition H1150M will yield best results. Post machining solution treatment of parts will be required prior to final hardening if machining in this condition.

Heat Treatment

CONDITION A--Soak at 1900 F (1038 C) for 30 minutes and cool below 60 F (16 C) for complete martensite transformation. CONDITION H 950- Treat Condition A material at 900 F(482 C) for 1 hour, air cool.. CONDITION H925, H1025, H1075, H1100, H1150- Soak solution treated material for 4 hours at specified temperature, air cool, CONDITION H1150M- Soak solution treated material at 1400 F (760 C) for 2 hours, air cool, then re-heat to 1150 F (620 C) for 4 hours and air cool.


Successfully welded by common fusion and resistance methods, this alloy should not be joined by oxyacetylene welding. AWS E/ER630 filler metal is recommended if required.


Soak for 1 hour at 2150 F (1177 C) prior to forging. Do not work below 1850 F (1010 C). Post-work solution treatment is required prior to final hardening.

Hot tags:ICI 6150 steel plate, ICI 6150 sheet, ICI 6150 Pipe fittings, ICI 6150 flat bar,ICI 6150 Valve,ICI 6150 heat exchanger parts

Related hot word search:ICI 6150 Valve ICI 6150,forging ICI 6150,ICI 6150 tube sheet,elbow ICI 6150,ICI 6150 flat bar,pipe ICI 6150,ICI 6150 Tee

Prev:ASTM 13Q
Next:ASTM 12Q