• ISO 13680 Valve
  • ISO 13680 Flange
  • ISO 13680 pipe fitting
  • ISO 13680 angle bar
  • ISO 13680 pipe
Super Duplex Stainless Steel Flanges | Stainless Steel Pipe Fittings | Duplex Stainless Steel Pipes | Stainless Steel Bars
Contact us: [email protected] | Whatsapp | 8618267732328
Home > Alloy steel > ISO 13680

ISO 13680

ISO 13680 angle bars, ISO 13680 flanges, Pipe Fitting, Steel Pipe, Heat Exchanger and Reducer, Gasket, Tee, Pipe Fitting, Tube Plate, have all specifications. With many yeas production experience, strict control ISO 13680 chemical composition and ISO 13680 mechanical properties.

Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.

Angle bar: 1mm to 1300mm
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.

Product description:
Step Shaft N08535  Tube N08535 Pie-shaped N08535    Ring N08535   Module Large valves of the main N08535  Other Profiled forgings N08535  
Special Steel classification:
Stainless steel, Hi-Steel HSLA-80, Mould steel,  Heat resistant steel, Tool steel, Ball bearing steel,Spring steel,  Alloy steel,  Construction steel,  Die steel, High-speed steel,  angles, flanges, tube sheet, tee, welded pipes, seamless tubes
Standard:
Chinese GB, Japanese JIS, US ASTM, UK BS, EU DIN standards and so on.
Products Introduction:
Specifications
Valve:
Diameter : 1mm-2000mm
Steel pipe:
Size: OD: 9.5mm - 813mm WT: 0.8mm - 34mm Length: 1 - 13m, also can be customed.
Flange:
Size: DN15-DN2000.
Length:  Any length based on the customer's requirement.

UNS N08535(ISO 13680)/Alloy8535 Seamless Pipe/Tube
--Good Performing in relatively high contents of CO2 and H2S Environment

Description:

Alloy 8535 is an Austenitic Fe (Iron) base material required for critical well conditions combining high concentrations of CO2, H2S and Chlorides. Launched in the mid-80’s as an innovative development, Alloy 8535 has become the reference product for Tubing & Liner applications in severe environments.

Specification:

OD:5mm-730mm
WT:0.35mm--120mm
Length:2Meter--25Meter

Standard:

Pipe/Tube: ASTM B622
Fittings: ASTM B366

Chemcial Composition%:
C :0.03max Cr: 24.0~27.0 Ni:29.0~36.5
Mn:1.00Max P: 0.03max S:0.03max
Fe: Bal

Mechanical Properties:
1>CH(110) Y.S(rp 0.2):758~965 T.S(rm):793min E.L(A5 min):11% min
2>CH(125) Y.S(rp 0.2):862~91000 T.S(rm):896min E.L(A5 min):10% min
3>SA Y.S(rp 0.2):214min T.S(rm):503min E.L(A5 min):40% min


German DIN of low-temperature steel Number and chemical composition
Material name: ensure that its quench-hardening ability structural steel grades: 20 MnTiBHA standard GB/T 5216-1985 "chemical ingredients: carbon C: 0.17 ~ 0.23 Si Si: 0.17 ~ 0.37 Mn Mn: 1.20 ~ 1.55 sulfur S: allow residual content than 0.030 P P: allow residual content than 0.030 chromium Cr: allow residual content than 0.035 Ni Ni: allow residual content than 0.030 copper Cu: allow residual content than 0.025 titanium Ti: 0.04 ~ 0.10 B B: 0.0005 ~ 0.0035" mechanical properties: impact toughness values α kv (J/cm2) : frequency 69 (7) hardness: annealing or high temperature tempering, than 187 HB, diameter of 4.4 mm creasing quartile sample size: sample blank dimensions for 15 mm standard and metallographic organization "heat treatment, heat treatment specification: is fire, 930 ~ 950 ℃, air cold; Quenching, 860 + 20 ℃, oil cold; Tempering, 200 + 20 ℃, air or water. "Delivery status: rolling or forging system state delivery. According to buyer's request can also heat treatment (is fire, annealed or high temperature tempering) state delivery. Delivery status should be indicated in the contract.

Mechanical properties

ViTa llium Mechanical properties,production completely according to the ViTa llium standards to meet the ViTa llium mechanical performance, can also according to the customer request, to meet the requirements of customers of ViTa llium mechanical properties.

Heat treatment

ViTa llium Heat treatment,production completely according to the ViTa llium standards to meet the ViTa llium Heat treatment, can also according to the customer request, to meet the requirements of customers of ViTa llium Heat treatment.

Machining

ViTa llium Machining,production completely according to the ViTa llium standards to meet the ViTa llium Machining, can also according to the customer request, to meet the requirements of customers of ViTa llium Machining.

Welding performance

ViTa llium Welding performance,production completely according to the ViTa llium standards to meet the ViTa llium Welding performance, can also according to the customer request, to meet the requirements of customers of ViTa llium Welding performance.
 

Related hot word search:ViTa llium ViTa llium tube plate, flat steel,sheet,coil,steel wire,round rods, ViTa llium Strip

Related hot word search:ISO 13680 Valve ISO 13680,forging ISO 13680,ISO 13680 tube sheet,elbow ISO 13680,ISO 13680 flat bar,pipe ISO 13680,ISO 13680 Tee

Prev:UNS N08535
Next:Alloy8535