- X2CrNi12 Valve
- X2CrNi12 Flange
- X2CrNi12 pipe fitting
- X2CrNi12 angle bar
- X2CrNi12 pipe
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
Material name: ensure that its quench-hardening ability structural steel grades: 20 MnTiBHA standard GB/T 5216-1985 "chemical ingredients: carbon C: 0.17 ~ 0.23 Si Si: 0.17 ~ 0.37 Mn Mn: 1.20 ~ 1.55 sulfur S: allow residual content than 0.030 P P: allow residual content than 0.030 chromium Cr: allow residual content than 0.035 Ni Ni: allow residual content than 0.030 copper Cu: allow residual content than 0.025 titanium Ti: 0.04 ~ 0.10 B B: 0.0005 ~ 0.0035" mechanical properties: impact toughness values α kv (J/cm2) : frequency 69 (7) hardness: annealing or high temperature tempering, than 187 HB, diameter of 4.4 mm creasing quartile sample size: sample blank dimensions for 15 mm standard and metallographic organization "heat treatment, heat treatment specification: is fire, 930 ~ 950 ℃, air cold; Quenching, 860 + 20 ℃, oil cold; Tempering, 200 + 20 ℃, air or water. "Delivery status: rolling or forging system state delivery. According to buyer's request can also heat treatment (is fire, annealed or high temperature tempering) state delivery. Delivery status should be indicated in the contract.