Home > Alloy steel > X4CrNiMo 17-12-2

X4CrNiMo 17-12-2

X4CrNiMo 17-12-2 angle bars, X4CrNiMo 17-12-2 flanges, Pipe Fitting, Steel Pipe, Heat Exchanger and Reducer, Gasket, Tee, Pipe Fitting, Tube Plate, have all specifications. With many yeas production experience, strict control X4CrNiMo 17-12-2 chemical composition and X4CrNiMo 17-12-2 mechanical properties.

Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.

Angle bar: 1mm to 1300mm
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.

ENQUIRY: X4CrNiMo 17-12-2

C	Si ≤	Mn ≤	P ≤	S ≤	Cr	Ni	Mo	Other
≤0.070	1.00	2.00	0.045	0.030	16.5-18.5	10.5-13.5	2.00-2.50	N≤0.11

SUS316 introduction:

China brand is a 0 Cr17Ni12Mo2, Germany is the chemical components of 1.4401 C: 0-0.08, Si: 0-1.00, Mn: 0-2.00, P: 0-0.045, S: 0-0.03, Ni: 10.00-14.00, Cr: 16.00-18.00, Mo: 2.00-3.00.

Performance and features: in sea water and all kinds of other media, corrosion resistance Cr19Ni9 than 0, and mainly for pitting corrosion resistant materials. For example: the sea with equipment, resist acid production equipment, bolts, nuts.

Mechanical properties: tensile test δ 0.2: frequency 205 MPa, δ b: frequency 520 MPa, δ 5:40% frequency, ψ: quartile 60%; Hardness test: HBS: more than 187, HRB: more than 90, HV: more than 200; Heat treatment: solid solution 1010-1150 ℃ soon cold.We can produce X4CrNiMo 17-12-2 steel plate, flat steel,sheet,coil,steel wire,round rods, X4CrNiMo 17-12-2 forging,and Tube Sheet,Special Steel,Stainless Steel,have all specifications. With DuoNian production experience, strict control X4CrNiMo 17-12-2 chemical composition and X4CrNiMo 17-12-2 mechanical properties.

Introduction to Our Products:

Specialized high quality steel

We have the advantages of equipment, technologies and price

Specifications：

Valve:
Diameter : 1mm-1300mm

Steel pipe:
Size: OD: 9.5mm - 813mm WT: 0.8mm - 34mm Length: 1 - 13m, also can be customed.

Items	seamless pipe & tube, pipe & tube
Standard	ASTM, GB, DIN, AISI, etc
Outer Diameter	Round pipe9.5mm--813mm
square	12.7x12.7--200X200mm
rectangular	20X40--150X200mm
Thickness	0.8mm - 34mm
Length	5.8m,6m, or as customers' request
Tolerance	a) Outer Diameter: +/- 0.2mm
	b) Thickness: +/- 0.02mm
	c) Length: +/- 5mm
Surface	180Grit, 320Grit, 400Grit Satin / Hairline
	400Grit, 500Grit, 600Grit Mirror finish
Application	Widely used in petroleum, Foodstuff, chemical industry, construction, electric power, nuclear energy, biotechnology, machinery, papermaking, shipbuilding, boiler fields, etc

Pipe fitting:
Size: 1/8 inch - 80 inch (DN6 - DN2000) WT: Sch5s - Sch160XXS

Items	Elbow,Equal Tee,Reducer Tee,Concentric Reducer,Eccentric Reducer,Cap,etc
Standard	ASME	ANSI B16.9,ANSI B16.28,MSS-SP-75
	DIN	DIN2605,DIN2615, DIN2616, DIN2617, DIN28011
	SGP	JISB2313
	EN	EN10253-1 EN10253-2
Material	ASME	A234 WPB,A234 WP1,A234 WP5,A234,WP9, A234 WPB11,A234 WPB12,A234 WPB22,WP91, A420,WPHY42,WPHY52,WPHY60,WPHY65, WPHY70,WP304,WP304L,WP304H,WP316, WP316L,WP321,WP347,WP347H
	DIN	ST37.0,ST35.8,ST45.8,S235JR,P235GH,P265GH, 10CrMo910,15CrMo,12Cr1MoV
	JIS	JIS G3454,STPG370,TPG410
Surface	Black paint/bright paint/Galvanized
Marking	As customer’s requirements

Flange:

Product Name	Flange
Items	Plate, Welding Neck, Slip on, Blind, Lap joint, Threaded Flange
Standard	ANSI	ANSI B16.5 ASME B16.47 series A/B
	DIN	DIN
	GOST	GOST 12820-80
	EN	EN1092-1:2002
	JIS	JIS B2220-2004, KS D3576, KS B6216 KS B1511-2007 JIS B2261; JIS B8210
	BS	BS4504 BS10 Table D/E
Material	ANSI	CS A105/SA 105NSS 304/304L, 316/316L Alloy Steel: WHPY45/52/65/80
	DIN	CS RST37.2;S235JR SS 304/304L,316/316L
	GOST	CS CT20;16MN;SS 304/304L,316/316L
	EN	CS RST37.2;S235JR;C22.8SS 304/304L,316/316L
	JIS	SS400,SF440 SS 304/304L, 316/316L
	BS	CSRST37.2;S235JR;C22.8;Q235SS 304/304L,316/316L
Pressure	ANSI	Class 150, 300, 600, 900, 1500 2500lbs
	DIN	PN6,PN10,PN16,PN25,PN40,PN64,PN100
	GOST	PN6,PN10,PN16,PN25
	EN	PN6,PN10,PN16,PN25,PN40,PN64,PN100
	JIS	1K,2K,5K,10K,16K,20K,30K,40K
	BS	PN6,PN10,PN16,PN25,PN40,PN64,PN100
Size	ANSI	1/2” – 60”
	DIN	DN15-DN2000
	GOST	DN15-DN1600
	EN	DN15-DN2000
	JIS	15A-1500A
	BS	DN15-DN2000
Coating	varnish, yellow paint, anti-rust oil, galvanizing etc
Usage	Used for the connection of all kinds of pipeline.
Usage	to convey the water, steam, air, gas and oil

Lenth: Any lenth based on the customer's requirement.

Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement

Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirement

Excellent service for all kinds of industries,with advantages of technologies, equipment and price.

C	Si ≤	Mn ≤	P ≤	S ≤	Cr	Ni	Mo	Other
≤0.070	1.00	2.00	0.045	0.030	16.5-18.5	10.5-13.5	2.00-2.50	N≤0.11

Introduction to Our Products:

Specialized high quality steel

We have the advantages of equipment, technologies and price

Specifications：

Valve:
Diameter : 1mm-1300mm

Steel pipe:
Size: OD: 9.5mm - 813mm WT: 0.8mm - 34mm Length: 1 - 13m, also can be customed.

Items	seamless pipe & tube, pipe & tube
Standard	ASTM, GB, DIN, AISI, etc
Outer Diameter	Round pipe9.5mm--813mm
square	12.7x12.7--200X200mm
rectangular	20X40--150X200mm
Thickness	0.8mm - 34mm
Length	5.8m,6m, or as customers' request
Tolerance	a) Outer Diameter: +/- 0.2mm
	b) Thickness: +/- 0.02mm
	c) Length: +/- 5mm
Surface	180Grit, 320Grit, 400Grit Satin / Hairline
	400Grit, 500Grit, 600Grit Mirror finish
Application	Widely used in petroleum, Foodstuff, chemical industry, construction, electric power, nuclear energy, biotechnology, machinery, papermaking, shipbuilding, boiler fields, etc

Pipe fitting:
Size: 1/8 inch - 80 inch (DN6 - DN2000) WT: Sch5s - Sch160XXS

Items	Elbow,Equal Tee,Reducer Tee,Concentric Reducer,Eccentric Reducer,Cap,etc
Standard	ASME	ANSI B16.9,ANSI B16.28,MSS-SP-75
	DIN	DIN2605,DIN2615, DIN2616, DIN2617, DIN28011
	SGP	JISB2313
	EN	EN10253-1 EN10253-2
Material	ASME	A234 WPB,A234 WP1,A234 WP5,A234,WP9, A234 WPB11,A234 WPB12,A234 WPB22,WP91, A420,WPHY42,WPHY52,WPHY60,WPHY65, WPHY70,WP304,WP304L,WP304H,WP316, WP316L,WP321,WP347,WP347H
	DIN	ST37.0,ST35.8,ST45.8,S235JR,P235GH,P265GH, 10CrMo910,15CrMo,12Cr1MoV
	JIS	JIS G3454,STPG370,TPG410
Surface	Black paint/bright paint/Galvanized
Marking	As customer’s requirements

Flange:

Product Name	Flange
Items	Plate, Welding Neck, Slip on, Blind, Lap joint, Threaded Flange
Standard	ANSI	ANSI B16.5 ASME B16.47 series A/B
	DIN	DIN
	GOST	GOST 12820-80
	EN	EN1092-1:2002
	JIS	JIS B2220-2004, KS D3576, KS B6216 KS B1511-2007 JIS B2261; JIS B8210
	BS	BS4504 BS10 Table D/E
Material	ANSI	CS A105/SA 105NSS 304/304L, 316/316L Alloy Steel: WHPY45/52/65/80
	DIN	CS RST37.2;S235JR SS 304/304L,316/316L
	GOST	CS CT20;16MN;SS 304/304L,316/316L
	EN	CS RST37.2;S235JR;C22.8SS 304/304L,316/316L
	JIS	SS400,SF440 SS 304/304L, 316/316L
	BS	CSRST37.2;S235JR;C22.8;Q235SS 304/304L,316/316L
Pressure	ANSI	Class 150, 300, 600, 900, 1500 2500lbs
	DIN	PN6,PN10,PN16,PN25,PN40,PN64,PN100
	GOST	PN6,PN10,PN16,PN25
	EN	PN6,PN10,PN16,PN25,PN40,PN64,PN100
	JIS	1K,2K,5K,10K,16K,20K,30K,40K
	BS	PN6,PN10,PN16,PN25,PN40,PN64,PN100
Size	ANSI	1/2” – 60”
	DIN	DN15-DN2000
	GOST	DN15-DN1600
	EN	DN15-DN2000
	JIS	15A-1500A
	BS	DN15-DN2000
Coating	varnish, yellow paint, anti-rust oil, galvanizing etc
Usage	Used for the connection of all kinds of pipeline.
Usage	to convey the water, steam, air, gas and oil

Lenth: Any lenth based on the customer's requirement.

Mechanical properties

X4CrNiMo 17-12-2 Mechanical properties,production completely according to the X4CrNiMo 17-12-2 standards to meet the X4CrNiMo 17-12-2 mechanical performance, can also according to the customer request, to meet the requirements of customers of X4CrNiMo 17-12-2 mechanical properties.

Heat treatment

X4CrNiMo 17-12-2 Heat treatment,production completely according to the X4CrNiMo 17-12-2 standards to meet the X4CrNiMo 17-12-2 Heat treatment, can also according to the customer request, to meet the requirements of customers of X4CrNiMo 17-12-2 Heat treatment.

Machining

X4CrNiMo 17-12-2 Machining,production completely according to the X4CrNiMo 17-12-2 standards to meet the X4CrNiMo 17-12-2 Machining, can also according to the customer request, to meet the requirements of customers of X4CrNiMo 17-12-2 Machining.

Welding performance

X4CrNiMo 17-12-2 Welding performance,production completely according to the X4CrNiMo 17-12-2 standards to meet the X4CrNiMo 17-12-2 Welding performance, can also according to the customer request, to meet the requirements of customers of X4CrNiMo 17-12-2 Welding performance.

Prev:1.4401
Next:1.4518