- 36CrNiMo4 Valve
- 36CrNiMo4 Flange
- 36CrNiMo4 pipe fitting
- 36CrNiMo4 Angle Bar
- 36CrNiMo4 pipe
36CrNiMo4
36CrNiMo4 angle bars, 36CrNiMo4 flanges, Pipe Fitting, Steel Pipe, Heat Exchanger and Reducer, Gasket, Tee, Pipe Fitting, Tube Plate, have all specifications. With many yeas production experience, strict control 36CrNiMo4 chemical composition and 36CrNiMo4 mechanical properties.
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Angle bar: 1mm to 1300mm
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.32-00.40 | 0.40 | 0.50-0.80 | 0.035 | 0.035 | 0.90-1.20 | 0.90-1.20 |
Mo | Al | Cu | Nb | Ti | V | Ce |
0.15-0.30 | ||||||
N | Co | Pb | B | Other | ||
Alloy steel AISI 4340\ DIN 36NiCrMo4\SNCM439\1.6511\GB 40CrNiMo
Specifications
Alloy steel 4340/1.6511 Use for shaft,screw bolt.joint shaft in widely use Factory state: annealed or Q+T,hot rolled or forg
Hot forged 36CrNiMo4 Valves
Material:
JUS |
5430 |
DIN |
36CrNiMo4 |
BS |
817 M 37 |
GOST |
40HN2MA |
AISI |
4340, 9840 |
NF |
35NCD5, 40NCD3 |
Dia:160-1000mm
UT:Sep 1921 Class C/c or D/d
Tolerance:DIN 1013
Grain size:5-8 or better
Permissible distorsion:2mm max in 1m length
Related hot word search:36CrNiMo4 Valve 36CrNiMo4 ,forging 36CrNiMo4 ,36CrNiMo4 tube sheet,elbow 36CrNiMo4 ,36CrNiMo4 flat bar,pipe 36CrNiMo4 ,36CrNiMo4 Tee