- 60Si8 Valve
- 60Si8 Flange
- 60Si8 pipe fitting
- 60Si8 angle bar
- 60Si8 pipe
60Si8
60Si8 angle bars, 60Si8 flanges, Pipe Fitting, Steel Pipe, Heat Exchanger and Reducer, Gasket, Tee, Pipe Fitting, Tube Plate, have all specifications. With many yeas production experience, strict control 60Si8 chemical composition and 60Si8 mechanical properties.
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Angle bar: 1mm to 1300mm
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.56-0.64 | 1.8-2.2 | 0.7-1.0 | 0.03 | 0.03 | ||
Mo | Al | Cu+10Sn | Nb | Ti | V | Ce |
≤0.6 | ||||||
N | Co | Pb | B | Other | ||
Mechanical Properties
Properties
|
Conditions
|
||
T (°C)
|
Treatment
|
||
Density (×1000 kg/m3)
|
7.85
|
25
|
|
Poisson's Ratio
|
0.27-0.30
|
25
|
|
Elastic Modulus (GPa)
|
190-210
|
25
|
|
Thermal Properties
Properties
|
Conditions
|
||
T (°C)
|
Treatment
|
||
Thermal Expansion (10-6/ºC)
|
14.4
|
20-425
|
|
Products Introduction:
Specifications
Valve:
Diameter : 1mm-2000mm
Square bar:
Size: 25mm * 25mm-800mm *800mm
Pipe fitting:
Size: 1/8 inch - 80 inch (DN6 - DN2000) WT: Sch5s - Sch160XXS
Tube/pipe:
Size: OD: 4-730mm WT: 0.35-120 mm.
Cold-rolled sheet: Thickness: 1-4mm Width:1000mm Length: 2000mm
Hot-rolled sheet: Thickness:4-120mm Width: 50-4000mm
Length: Any length based on the customer's requirement.
Standard: GB, ISO, DIN/GL, NF/BV, BS, JIS/JASO/NDS, ASTM/ SAE/ UNS/ AISI...
Related hot word search:60Si8 Valve 60Si8,forging 60Si8,60Si8 tube sheet,elbow 60Si8,60Si8 flat bar,pipe 60Si8,60Si8 Tee