- AMS 4924 Valve
- AMS 4924 Flange
- AMS 4924 pipe fitting
- AMS 4924 angle bar
- AMS 4924 pipe
AMS 4924
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
AISI 1010 steel, hot rolled bar, 19-32 mm (0.75-1.25 in) round or thickness | |
---|---|
Categories: | Metal; Ferrous Metal; Carbon Steel; AISI 1000 Series Steel; Low Carbon steel |
Material Notes: | Easily cold formed by heading, extruding, upsetting, bending, and other deforming processes. Uses for wires include electroplated products, such as racks, storage bins, shopping carts, fan guards, and jewelry, and unplated such as wires, staples, hardware, and barbed wire. |
Key Words: | UNS G10100, AMS 5040, AMS 5042, AMS 5044, AMS 5047, AMS 5053, ASTM A29, ASTM A108, ASTM A510, ASTM A519, ASTM A545, ASTM A549, ASTM A575, ASTM A576, MIL SPEC MIL-S-11310 (CS1010), JIS S 9 CK, SAE J403, SAE J412, SAE J414, DIN 1.1121, AFNOR XC 10 (Fr), JIS S10 C, JIS S 12 C |
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 7.87 g/cc | 0.284 lb/in³ | Typical for steel |
Mechanical Properties | Metric | English | Comments |
Hardness, Brinell | 95 | 95 | |
Hardness, Knoop | 113 | 113 | Converted from Brinell hardness. |
Hardness, Rockwell B | 55 | 55 | Converted from Brinell hardness. |
Hardness, Vickers | 98 | 98 | Converted from Brinell hardness. |
Tensile Strength, Ultimate | 325 MPa | 47100 psi | |
Tensile Strength, Yield | 180 MPa | 26100 psi | |
Elongation at Break | 28.0 % | 28.0 % | in 50 mm |
Reduction of Area | 50.0 % | 50.0 % | |
Modulus of Elasticity | 200 GPa | 29000 ksi | Typical for steel |
Bulk Modulus | 140 GPa | 20300 ksi | Typical for steel |
Poissons Ratio | 0.290 | 0.290 | Typical For Steel |
Machinability | 55 % | 55 % | Based on AISI 1212 steel. as 100% machinability. The machinability of Group I bar, rod, and wire products can be improved by cold drawing. |
Shear Modulus | 80.0 GPa | 11600 ksi | Typical for steel |
Electrical Properties | Metric | English | Comments |
Electrical Resistivity | 0.0000143 ohm-cm | 0.0000143 ohm-cm | condition unknown |
Thermal Properties | Metric | English | Comments |
CTE, linear |
12.2 µm/m-°C @Temperature 0.000 - 100 °C |
6.78 µin/in-°F @Temperature 32.0 - 212 °F |
|
13.0 µm/m-°C @Temperature 0.000 - 200 °C |
7.22 µin/in-°F @Temperature 32.0 - 392 °F |
||
13.5 µm/m-°C @Temperature 0.000 - 300 °C |
7.50 µin/in-°F @Temperature 32.0 - 572 °F |
||
13.8 µm/m-°C @Temperature 0.000 - 400 °C |
7.67 µin/in-°F @Temperature 32.0 - 752 °F |
||
14.2 µm/m-°C @Temperature 0.000 - 500 °C |
7.89 µin/in-°F @Temperature 32.0 - 932 °F |
||
14.6 µm/m-°C @Temperature 0.000 - 600 °C |
8.11 µin/in-°F @Temperature 32.0 - 1110 °F |
||
14.9 µm/m-°C @Temperature 0.000 - 700 °C |
8.28 µin/in-°F @Temperature 32.0 - 1290 °F |
||
Specific Heat Capacity | 0.448 J/g-°C | 0.107 BTU/lb-°F | condition unknown; 50-100°C (122-212°F) |
0.498 J/g-°C @Temperature 150 - 200 °C |
0.119 BTU/lb-°F @Temperature 302 - 392 °F |
||
0.519 J/g-°C @Temperature 200 - 250 °C |
0.124 BTU/lb-°F @Temperature 392 - 482 °F |
||
0.536 J/g-°C @Temperature 250 - 300 °C |
0.128 BTU/lb-°F @Temperature 482 - 572 °F |
||
0.565 J/g-°C @Temperature 300 - 350 °C |
0.135 BTU/lb-°F @Temperature 572 - 662 °F |
||
0.590 J/g-°C @Temperature 350 - 400 °C |
0.141 BTU/lb-°F @Temperature 662 - 752 °F |
||
0.649 J/g-°C @Temperature 400 - 450 °C |
0.155 BTU/lb-°F @Temperature 752 - 842 °F |
||
0.729 J/g-°C @Temperature 550 - 600 °C |
0.174 BTU/lb-°F @Temperature 1020 - 1110 °F |
||
0.825 J/g-°C @Temperature 650 - 700 °C |
0.197 BTU/lb-°F @Temperature 1200 - 1290 °F |
||
Thermal Conductivity | 51.9 W/m-K | 360 BTU-in/hr-ft²-°F | Typical steel |
Component Elements Properties | Metric | English | Comments |
Carbon, C | 0.080 - 0.13 % | 0.080 - 0.13 % | |
Iron, Fe | 99.18 - 99.62 % | 99.18 - 99.62 % | As remainder |
Manganese, Mn | 0.30 - 0.60 % | 0.30 - 0.60 % | |
Phosphorous, P | <= 0.040 % | <= 0.040 % | |
Sulfur, S | <= 0.050 % | <= 0.050 % |
Users viewing this material also viewed the following:
AISI 1010 Steel, cold drawn
AISI 1010 Steel, cold drawn bar, 19-32 mm (0.75-1.25 in) round or thickness
AISI 1010 Steel, CQ Pipe Fitting,1.6-5.8 mm round or thickness
AISI 1008 Steel, hot rolled bar, 19-32 mm (0.75-1.25 in) round
AISI 1008 Steel, cold drawn bar, 19-32 mm (0.75-1.25 in) round
M1010B / 6783
Mechanical Properties
Properties
|
Conditions
|
||
T (°C)
|
Treatment
|
||
Density (×1000 kg/m3)
|
7.85
|
25
|
|
Poisson's Ratio
|
0.27-0.30
|
25
|
|
Elastic Modulus (GPa)
|
190-210
|
25
|
|
Properties
|
Conditions
|
||
T (°C)
|
Treatment
|
||
Thermal Expansion (10-6/ºC)
|
14.4
|
20-425
|
|
Valve:
Diameter : 1mm-2000mm
Steel pipe:
Size:
OD: 9.5mm - 813mm
WT: 0.8mm - 34mm
Length: 1 - 13m, also can be customed.
Items |
seamless pipe & tube, pipe & tube |
|||
Standard |
ASTM, GB, DIN, AISI, etc |
|||
Outer Diameter |
Round pipe9.5mm--813mm |
|||
square |
12.7x12.7--200X200mm |
|||
rectangular |
20X40--150X200mm |
|||
Thickness |
0.8mm - 34mm |
|||
Length |
5.8m,6m, or as customers' request |
|||
Tolerance |
a) Outer Diameter: +/- 0.2mm |
|||
b) Thickness: +/- 0.02mm |
||||
c) Length: +/- 5mm |
||||
Surface |
180Grit, 320Grit, 400Grit Satin / Hairline |
|||
400Grit, 500Grit, 600Grit Mirror finish |
||||
Application |
Widely used in petroleum, Foodstuff, chemical industry, construction, electric power, nuclear energy, biotechnology, machinery, papermaking, shipbuilding, boiler fields, etc |
Pipe fitting:
Size: 1/8 inch - 80 inch (DN6 - DN2000) WT: Sch5s - Sch160XXS
Items |
Elbow,Equal Tee,Reducer Tee,Concentric Reducer,Eccentric Reducer,Cap,etc |
|
Standard |
ASME |
ANSI B16.9,ANSI B16.28,MSS-SP-75 |
DIN |
DIN2605,DIN2615, DIN2616, DIN2617, DIN28011 |
|
SGP |
JISB2313 |
|
EN |
EN10253-1 EN10253-2 |
|
Material |
ASME |
A234 WPB,A234 WP1,A234 WP5,A234,WP9, A234 WPB11,A234 WPB12,A234 WPB22,WP91, A420,WPHY42,WPHY52,WPHY60,WPHY65, WPHY70,WP304,WP304L,WP304H,WP316, WP316L,WP321,WP347,WP347H |
DIN |
ST37.0,ST35.8,ST45.8,S235JR,P235GH,P265GH, 10CrMo910,15CrMo,12Cr1MoV |
|
JIS |
JIS G3454,STPG370,TPG410 |
|
Surface |
Black paint/bright paint/Galvanized |
|
Marking |
As customer’s requirements |
Flange:
Product Name | Flange | |
Items | Plate, Welding Neck, Slip on, Blind, Lap joint, Threaded Flange | |
Standard | ANSI | ANSI B16.5 ASME B16.47 series A/B |
DIN | DIN | |
GOST | GOST 12820-80 | |
EN | EN1092-1:2002 | |
JIS | JIS B2220-2004, KS D3576, KS B6216 KS B1511-2007 JIS B2261; JIS B8210 | |
BS | BS4504 BS10 Table D/E | |
Material | ANSI | CS A105/SA 105NSS 304/304L, 316/316L Alloy Steel: WHPY45/52/65/80 |
DIN | CS RST37.2;S235JR SS 304/304L,316/316L | |
GOST | CS CT20;16MN;SS 304/304L,316/316L | |
EN | CS RST37.2;S235JR;C22.8SS 304/304L,316/316L | |
JIS | SS400,SF440 SS 304/304L, 316/316L | |
BS | CSRST37.2;S235JR;C22.8;Q235SS 304/304L,316/316L | |
Pressure | ANSI | Class 150, 300, 600, 900, 1500 2500lbs |
DIN | PN6,PN10,PN16,PN25,PN40,PN64,PN100 | |
GOST | PN6,PN10,PN16,PN25 | |
EN | PN6,PN10,PN16,PN25,PN40,PN64,PN100 | |
JIS | 1K,2K,5K,10K,16K,20K,30K,40K | |
BS | PN6,PN10,PN16,PN25,PN40,PN64,PN100 | |
Size | ANSI | 1/2” – 60” |
DIN | DN15-DN2000 | |
GOST | DN15-DN1600 | |
EN | DN15-DN2000 | |
JIS | 15A-1500A | |
BS | DN15-DN2000 | |
Coating | varnish, yellow paint, anti-rust oil, galvanizing etc | |
Usage | Used for the connection of all kinds of pipeline. | |
to convey the water, steam, air, gas and oil |
Standard: GB, ISO, DIN/GL, NF/BV, BS, JIS/JASO/NDS, ASTM/ SAE/ UNS/ AISI...
Related hot word search:AMS 4924 Valve AMS 4924,forging AMS 4924,AMS 4924 tube sheet,elbow AMS 4924,AMS 4924 flat bar,pipe AMS 4924,AMS 4924 Tee
Prev:UNS G10100
Next:ASTM A36