- FCD450-10 Valve
- FCD450-10 Flange
- FCD450-10 pipe fitting
- FCD450-10 angle bar
- FCD450-10 pipe
FCD450-10
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
C ≤ | Si ≤ | Mn ≤ | P ≤ | S ≤ | Cr | Ni |
---|---|---|---|---|---|---|
≥2.5 | 0.02 | |||||
Mg | Al | Cu | Nb | Ti | V | Ce |
≤0.09 | ||||||
N | Co | Pb | B | Other | ||
Mechanical Properties
Properties
|
Conditions
|
||
T (°C)
|
Treatment
|
||
Density (×1000 kg/m3)
|
7.85
|
25
|
|
Poisson's Ratio
|
0.27-0.30
|
25
|
|
Elastic Modulus (GPa)
|
190-210
|
25
|
|
Thermal Properties
Properties
|
Conditions
|
||
T (°C)
|
Treatment
|
||
Thermal Expansion (10-6/ºC)
|
14.4
|
20-425
|
|
Products Introduction:
Specifications
Valve:
Diameter : 1mm-2000mm
Square bar:
Size: 25mm * 25mm-800mm *800mm
Pipe fitting:
Size: 1/8 inch - 80 inch (DN6 - DN2000) WT: Sch5s - Sch160XXS
Tube/pipe:
Size: OD: 4-730mm WT: 0.35-120 mm.
Cold-rolled sheet: Thickness: 1-4mm Width:1000mm Length: 2000mm
Hot-rolled sheet: Thickness:4-120mm Width: 50-4000mm
Length: Any length based on the customer's requirement.
Standard: GB, ISO, DIN/GL, NF/BV, BS, JIS/JASO/NDS, ASTM/ SAE/ UNS/ AISI...
Related hot word search:FCD450-10 Valve FCD450-10,forging FCD450-10,FCD450-10 tube sheet,elbow FCD450-10,FCD450-10 flat bar,pipe FCD450-10,FCD450-10 Tee
Prev:FCD400-15A
Next:FCD500-7