- ISO 1071(2003) FeC-5 Valve
- ISO 1071(2003) FeC-5 Flange
- ISO 1071(2003) FeC-5 pipe fitting
- ISO 1071(2003) FeC-5 angle bar
- ISO 1071(2003) FeC-5 pipe
ISO 1071(2003) FeC-5
ISO 1071(2003) FeC-5 angle bars, ISO 1071(2003) FeC-5 flanges, Pipe Fitting, Steel Pipe, Heat Exchanger and Reducer, Gasket, Tee, Pipe Fitting, Tube Plate, have all specifications. With many yeas production experience, strict control ISO 1071(2003) FeC-5 chemical composition and ISO 1071(2003) FeC-5 mechanical properties.
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Angle bar: 1mm to 1300mm
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
|
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
|---|---|---|---|---|---|---|
| 3.2-4.0 | 3.2-3.8 | 0.1-0.4 | 0.05 | 0.015 | ≤0.5 | |
| Mg | Al | Fe | Nb | Ti | V | Ce |
| 0.04-0.1 | ... | ≤0.2 | ||||
| N | Co | Pb | B | Other | ||
| ≤1.0 | ||||||
Mechanical Properties
|
Properties
|
Conditions
|
||
|
T (°C)
|
Treatment
|
||
|
Density (×1000 kg/m3)
|
7.85
|
25
|
|
|
Poisson's Ratio
|
0.27-0.30
|
25
|
|
|
Elastic Modulus (GPa)
|
190-210
|
25
|
|
Thermal Properties
|
Properties
|
Conditions
|
||
|
T (°C)
|
Treatment
|
||
|
Thermal Expansion (10-6/ºC)
|
14.4
|
20-425
|
|
Products Introduction:
Specifications
Valve:
Diameter : 1mm-2000mm
Square bar:
Size: 25mm * 25mm-800mm *800mm
Pipe fitting:
Size: 1/8 inch - 80 inch (DN6 - DN2000) WT: Sch5s - Sch160XXS
Tube/pipe:
Size: OD: 4-730mm WT: 0.35-120 mm.
Cold-rolled sheet: Thickness: 1-4mm Width:1000mm Length: 2000mm
Hot-rolled sheet: Thickness:4-120mm Width: 50-4000mm
Length: Any length based on the customer's requirement.
Standard: GB, ISO, DIN/GL, NF/BV, BS, JIS/JASO/NDS, ASTM/ SAE/ UNS/ AISI...
Related hot word search:ISO 1071(2003) FeC-5 Valve ISO 1071(2003) FeC-5,forging ISO 1071(2003) FeC-5,ISO 1071(2003) FeC-5 tube sheet,elbow ISO 1071(2003) FeC-5,ISO 1071(2003) FeC-5 flat bar,pipe ISO 1071(2003) FeC-5,ISO 1071(2003) FeC-5 Tee
Prev:ISO 1071(2003) FeC-4
Next:ISO 1071(2003) FeC-GF