- PH35 Valve
- PH35 Flange
- PH35 pipe fitting
- PH35 angle bar
- PH35 pipe
PH35
PH35 angle bars, PH35 flanges, Pipe Fitting, Steel Pipe, Heat Exchanger and Reducer, Gasket, Tee, Pipe Fitting, Tube Plate, have all specifications. With many yeas production experience, strict control PH35 chemical composition and PH35 mechanical properties.
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Angle bar: 1mm to 1300mm
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.22 | 0.15-0.55 | 1.0-1.5 | 0.035 | 0.035 | ||
Mo | Al | Cu | Nb | Ti | V | Ce |
N | Co | Pb | B | Other | ||
+Nb,Ti,V | ||||||
Mechanical Properties
Properties
|
Conditions
|
||
T (°C)
|
Treatment
|
||
Density (×1000 kg/m3)
|
7.85
|
25
|
|
Poisson's Ratio
|
0.27-0.30
|
25
|
|
Elastic Modulus (GPa)
|
190-210
|
25
|
|
Thermal Properties
Properties
|
Conditions
|
||
T (°C)
|
Treatment
|
||
Thermal Expansion (10-6/ºC)
|
14.4
|
20-425
|
|
Products Introduction:
Specifications
Valve:
Diameter : 1mm-2000mm
Square bar:
Size: 25mm * 25mm-800mm *800mm
Pipe fitting:
Size: 1/8 inch - 80 inch (DN6 - DN2000) WT: Sch5s - Sch160XXS
Tube/pipe:
Size: OD: 4-730mm WT: 0.35-120 mm.
Cold-rolled sheet: Thickness: 1-4mm Width:1000mm Length: 2000mm
Hot-rolled sheet: Thickness:4-120mm Width: 50-4000mm
Length: Any length based on the customer's requirement.
Standard: GB, ISO, DIN/GL, NF/BV, BS, JIS/JASO/NDS, ASTM/ SAE/ UNS/ AISI...
Related hot word search:PH35 Valve PH35,forging PH35,PH35 tube sheet,elbow PH35,PH35 flat bar,pipe PH35,PH35 Tee