- PL25 Valve
- PL25 Flange
- PL25 pipe fitting
- PL25 angle bar
- PL25 pipe
PL25
PL25 angle bars, PL25 flanges, Pipe Fitting, Steel Pipe, Heat Exchanger and Reducer, Gasket, Tee, Pipe Fitting, Tube Plate, have all specifications. With many yeas production experience, strict control PL25 chemical composition and PL25 mechanical properties.
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Angle bar: 1mm to 1300mm
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.17 | 0.35 | 0.4-1.0 | 0.03 | 0.025 | ||
Mo | Al | Cu | Nb | Ti | V | Ce |
≥0.015 | ||||||
N | Co | Pb | B | Other | ||
Mechanical Properties
Properties
|
Conditions
|
||
T (°C)
|
Treatment
|
||
Density (×1000 kg/m3)
|
7.85
|
25
|
|
Poisson's Ratio
|
0.27-0.30
|
25
|
|
Elastic Modulus (GPa)
|
190-210
|
25
|
|
Thermal Properties
Properties
|
Conditions
|
||
T (°C)
|
Treatment
|
||
Thermal Expansion (10-6/ºC)
|
14.4
|
20-425
|
|
Products Introduction:
Specifications
Valve:
Diameter : 1mm-2000mm
Square bar:
Size: 25mm * 25mm-800mm *800mm
Pipe fitting:
Size: 1/8 inch - 80 inch (DN6 - DN2000) WT: Sch5s - Sch160XXS
Tube/pipe:
Size: OD: 4-730mm WT: 0.35-120 mm.
Cold-rolled sheet: Thickness: 1-4mm Width:1000mm Length: 2000mm
Hot-rolled sheet: Thickness:4-120mm Width: 50-4000mm
Length: Any length based on the customer's requirement.
Standard: GB, ISO, DIN/GL, NF/BV, BS, JIS/JASO/NDS, ASTM/ SAE/ UNS/ AISI...
Related hot word search:PL25 Valve PL25,forging PL25,PL25 tube sheet,elbow PL25,PL25 flat bar,pipe PL25,PL25 Tee