- SD295A Valve
- SD295A Flange
- SD295A pipe fitting
- SD295A angle bar
- SD295A pipe
SD295A
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.05 | 0.05 | |||||
Mo | Al | Cu | Nb | Ti | V | Ce |
N | Co | Pb | B | Other | ||
бs/mpa 295 | ||||||
Mechanical Properties
Properties
|
Conditions
|
||
T (°C)
|
Treatment
|
||
Density (×1000 kg/m3)
|
7.85
|
25
|
|
Poisson's Ratio
|
0.27-0.30
|
25
|
|
Elastic Modulus (GPa)
|
190-210
|
25
|
|
Thermal Properties
Properties
|
Conditions
|
||
T (°C)
|
Treatment
|
||
Thermal Expansion (10-6/ºC)
|
14.4
|
20-425
|
|
Products Introduction:
Specifications
Valve:
Diameter : 1mm-2000mm
Square bar:
Size: 25mm * 25mm-800mm *800mm
Pipe fitting:
Size: 1/8 inch - 80 inch (DN6 - DN2000) WT: Sch5s - Sch160XXS
Tube/pipe:
Size: OD: 4-730mm WT: 0.35-120 mm.
Cold-rolled sheet: Thickness: 1-4mm Width:1000mm Length: 2000mm
Hot-rolled sheet: Thickness:4-120mm Width: 50-4000mm
Length: Any length based on the customer's requirement.
Standard: GB, ISO, DIN/GL, NF/BV, BS, JIS/JASO/NDS, ASTM/ SAE/ UNS/ AISI...
Related hot word search:SD295A Valve SD295A,forging SD295A,SD295A tube sheet,elbow SD295A,SD295A flat bar,pipe SD295A,SD295A Tee