• NiCr 80 20 Valve
  • NiCr 80 20 Flange
  • NiCr 80 20 pipe fitting
  • NiCr 80 20 angle bar
  • NiCr 80 20 pipe
Super Duplex Stainless Steel Flanges | Stainless Steel Pipe Fittings | Duplex Stainless Steel Pipes | Stainless Steel Bars
Contact us: [email protected] | Whatsapp | 8618267732328
Home > High alloy > NiCr 80 20

NiCr 80 20

NiCr 80 20 angle bars, NiCr 80 20 flanges, Pipe Fitting, Steel Pipe, Heat Exchanger and Reducer, Gasket, Tee, Pipe Fitting, Tube Plate, have all specifications. With many yeas production experience, strict control NiCr 80 20 chemical composition and NiCr 80 20 mechanical properties.

Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.

Angle bar: 1mm to 1300mm
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
Data Table for:Products: High temperature high strength alloy and high-temperature alloy:NiCr 80 20

NiCr 80 20 properties and heat treatment forged piece, Including NiCr 80 20 application and specifications, Including NiCr 80 20 steel plate, NiCr 80 20 sheet, NiCr 80 20 square steel, NiCr 80 20 flat bar,NiCr 80 20 Valve,NiCr 80 20 forgings.


Introduction to Our Products:

Specialized high quality steel

We have the advantages of equipment, technologies and price


NiCr 80 20 has the following specifications:

Valve:
Diameter : 1mm-1300mm

Steel pipe:
Size: OD: 9.5mm - 813mm WT: 0.8mm - 34mm Length: 1 - 13m, also can be customed.

Items

seamless pipe & tube, pipe & tube

Standard

ASTM, GB, DIN, AISI, etc

Outer Diameter

Round pipe9.5mm--813mm  

square

12.7x12.7--200X200mm 

rectangular

20X40--150X200mm

Thickness

0.8mm - 34mm

Length

5.8m,6m, or as customers' request

Tolerance

a) Outer Diameter:  +/- 0.2mm

b) Thickness: +/- 0.02mm

c) Length: +/- 5mm

Surface

180Grit, 320Grit, 400Grit Satin / Hairline

 

400Grit, 500Grit, 600Grit Mirror finish

Application

Widely used in petroleum, Foodstuff, chemical industry, construction, electric power, nuclear energy, biotechnology, machinery, papermaking, shipbuilding, boiler fields, etc

Pipe fitting:
Size: 1/8 inch - 80 inch (DN6 - DN2000) WT: Sch5s - Sch160XXS

Items

Elbow,Equal Tee,Reducer Tee,Concentric Reducer,Eccentric Reducer,Cap,etc

Standard

ASME

ANSI B16.9,ANSI B16.28,MSS-SP-75

 

DIN

DIN2605,DIN2615, DIN2616, DIN2617, DIN28011

 

SGP

JISB2313

 

EN

EN10253-1  EN10253-2

Material

ASME

A234 WPB,A234 WP1,A234 WP5,A234,WP9,

A234 WPB11,A234 WPB12,A234 WPB22,WP91,

A420,WPHY42,WPHY52,WPHY60,WPHY65,

WPHY70,WP304,WP304L,WP304H,WP316,

WP316L,WP321,WP347,WP347H

 

DIN

ST37.0,ST35.8,ST45.8,S235JR,P235GH,P265GH,

10CrMo910,15CrMo,12Cr1MoV

 

JIS

JIS G3454,STPG370,TPG410

Surface

Black paint/bright paint/Galvanized

Marking

As customer’s requirements

Flange:

Product Name Flange
Items Plate, Welding Neck, Slip on, Blind, Lap joint, Threaded Flange
Standard ANSI ANSI B16.5 ASME B16.47 series A/B
DIN DIN
GOST GOST 12820-80
EN EN1092-1:2002
JIS JIS B2220-2004, KS D3576, KS B6216 KS B1511-2007 JIS B2261; JIS B8210
BS BS4504 BS10 Table D/E
Material ANSI CS A105/SA 105NSS 304/304L, 316/316L Alloy Steel: WHPY45/52/65/80
DIN CS RST37.2;S235JR SS 304/304L,316/316L
GOST CS CT20;16MN;SS 304/304L,316/316L
EN CS RST37.2;S235JR;C22.8SS 304/304L,316/316L
JIS SS400,SF440 SS 304/304L, 316/316L
BS CSRST37.2;S235JR;C22.8;Q235SS 304/304L,316/316L
Pressure ANSI Class 150, 300, 600, 900, 1500 2500lbs
DIN PN6,PN10,PN16,PN25,PN40,PN64,PN100
GOST PN6,PN10,PN16,PN25
EN PN6,PN10,PN16,PN25,PN40,PN64,PN100
JIS 1K,2K,5K,10K,16K,20K,30K,40K
BS PN6,PN10,PN16,PN25,PN40,PN64,PN100
Size ANSI 1/2” – 60”
DIN DN15-DN2000
GOST DN15-DN1600
EN DN15-DN2000
JIS 15A-1500A
BS DN15-DN2000
Coating varnish, yellow paint, anti-rust oil, galvanizing etc
Usage Used for the connection of all kinds of pipeline.
to convey the water, steam, air, gas and oil

Lenth: Any lenth based on the customer's requirement.

Tubings: OD: φ6-219 mm, with wall thickness ranging from 1-35 mm.

Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.


Ni :80%

Cr: 20%

Mechanical Properties

Quantity Value Unit
Young's modulus 214000 - 214000 MPa
Tensile strength 730 - 730 MPa
Yield strength 350 - 350 MPa

Physical Properties

Quantity Value Unit
Thermal expansion 13 - 13 e-6/K
Thermal conductivity 13 - 13 W/m.K
Specific heat 450 - 450 J/kg.K
Melting temperature 1390 - 1425 °C
Density 8300 - 8300 kg/m3
Resistivity 1.1 - 1.1 Ohm.mm2/m
Electrochemical potential -0.26 - -0.26 V

Environmental Data

Quantity Value Unit
Eco indicator 95 190.9 mPt
EPS 43600 mELU
Ex (in) / Ex (out) 65.6238077069821 MJ/MJ
GER 310 MJ
Raw materials input 14.1409715897026 kg
Solid 0.030037 kg
Eco indicator 99 3.19 Pt
Environmental remarks 43% of the world production comes from the US and Canada. Another 30% of the world production is won in Siberia (Norilsk). There are two types of Nickel ore: sulphidic and oxidic ore. Sulphidic nickel ore is mainly extracted in underground mine winning and has 0,5-3% Ni content. Oxidic ore comes from daylight winning but has a lower metal content (0,9-1,4%Ni). The most important environmental problem is the SO2 emission associated with the refinery process. See for the environmental aspects the individual alloy metals data.


Machining performance

NiCr 80 20 the mechanical properties of the report, the report provides detailed performance analysis and application.


Principal Design Features

One of the most widely used precipitation hardening grades in the business. While soft and ductile in the solution annealed condition, it is capable of high properties with a single precipitation or aging treatment. Characterized by good corrosion resistance, high harness, toughness and strength.


Machinability

Long, gummy chips characterize this alloys machinability. It can be machined in the annealed condition, however condition H1150M will yield best results. Post machining solution treatment of parts will be required prior to final hardening if machining in this condition.


Heat Treatment

CONDITION A--Soak at 1900 F (1038 C) for 30 minutes and cool below 60 F (16 C) for complete martensite transformation. CONDITION H 950- Treat Condition A material at 900 F(482 C) for 1 hour, air cool.. CONDITION H925, H1025, H1075, H1100, H1150- Soak solution treated material for 4 hours at specified temperature, air cool, CONDITION H1150M- Soak solution treated material at 1400 F (760 C) for 2 hours, air cool, then re-heat to 1150 F (620 C) for 4 hours and air cool.


Welding

Successfully welded by common fusion and resistance methods, this alloy should not be joined by oxyacetylene welding. AWS E/ER630 filler metal is recommended if required.


Forging

Soak for 1 hour at 2150 F (1177 C) prior to forging. Do not work below 1850 F (1010 C). Post-work solution treatment is required prior to final hardening.

Related hot word search:NiCr 80 20 Valve NiCr 80 20,forging NiCr 80 20,NiCr 80 20 tube sheet,elbow NiCr 80 20,NiCr 80 20 flat bar,pipe NiCr 80 20,NiCr 80 20 Tee

Prev:ISO 1071(2003) NiCu-B
Next:SAE 3310