• Nistelle 625 Valve
  • Nistelle 625 Flange
  • Nistelle 625 pipe fitting
  • Nistelle 625 Angle Bar
  • Nistelle 625 pipe
Super Duplex Stainless Steel Flanges | Stainless Steel Pipe Fittings | Duplex Stainless Steel Pipes | Stainless Steel Bars
Contact us: [email protected] | Whatsapp | 8618267732328
Home > High alloy > Nistelle 625

Nistelle 625

Nistelle 625 angle bars, Nistelle 625 flanges, Pipe Fitting, Steel Pipe, Heat Exchanger and Reducer, Gasket, Tee, Pipe Fitting, Tube Plate, have all specifications. With many yeas production experience, strict control Nistelle 625 chemical composition and Nistelle 625 mechanical properties.

Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.

Angle bar: 1mm to 1300mm
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.

Nistelle 625
Data Table for:Products: High temperature high strength alloy and high-temperature alloy:Nistelle 625
Nistelle 625 properties and heat treatment forged piece, Including Nistelle 625 application and specifications, Including Nistelle 625 tube plate, Nistelle 625 Pipe Fitting, Nistelle 625 flange, Nistelle 625 Angle Bar,Nistelle 625 Valve,Nistelle 625 3d bend.


--------------------------------------------------------------------------------

Introduction to Our Products:
Specialized high quality steel

We have the advantages of equipment, technologies and price


--------------------------------------------------------------------------------

Nistelle 625 has the following specifications:

Valve:
Diameter : 1mm-1300mm

Steel pipe:
Size: OD: 9.5mm - 813mm WT: 0.8mm - 34mm Length: 1 - 13m, also can be customed.

Items

seamless pipe & tube, pipe & tube

Standard

ASTM, GB, DIN, AISI, etc

Outer Diameter

Round pipe9.5mm--813mm  

square

12.7x12.7--200X200mm 

rectangular

20X40--150X200mm

Thickness

0.8mm - 34mm

Length

5.8m,6m, or as customers' request

Tolerance

a) Outer Diameter:  +/- 0.2mm

b) Thickness: +/- 0.02mm

c) Length: +/- 5mm

Surface

180Grit, 320Grit, 400Grit Satin / Hairline

 

400Grit, 500Grit, 600Grit Mirror finish

Application

Widely used in petroleum, Foodstuff, chemical industry, construction, electric power, nuclear energy, biotechnology, machinery, papermaking, shipbuilding, boiler fields, etc

Pipe fitting:
Size: 1/8 inch - 80 inch (DN6 - DN2000) WT: Sch5s - Sch160XXS

Items

Elbow,Equal Tee,Reducer Tee,Concentric Reducer,Eccentric Reducer,Cap,etc

Standard

ASME

ANSI B16.9,ANSI B16.28,MSS-SP-75

 

DIN

DIN2605,DIN2615, DIN2616, DIN2617, DIN28011

 

SGP

JISB2313

 

EN

EN10253-1  EN10253-2

Material

ASME

A234 WPB,A234 WP1,A234 WP5,A234,WP9,

A234 WPB11,A234 WPB12,A234 WPB22,WP91,

A420,WPHY42,WPHY52,WPHY60,WPHY65,

WPHY70,WP304,WP304L,WP304H,WP316,

WP316L,WP321,WP347,WP347H

 

DIN

ST37.0,ST35.8,ST45.8,S235JR,P235GH,P265GH,

10CrMo910,15CrMo,12Cr1MoV

 

JIS

JIS G3454,STPG370,TPG410

Surface

Black paint/bright paint/Galvanized

Marking

As customer’s requirements

Flange:

Product Name Flange
Items Plate, Welding Neck, Slip on, Blind, Lap joint, Threaded Flange
Standard ANSI ANSI B16.5 ASME B16.47 series A/B
DIN DIN
GOST GOST 12820-80
EN EN1092-1:2002
JIS JIS B2220-2004, KS D3576, KS B6216 KS B1511-2007 JIS B2261; JIS B8210
BS BS4504 BS10 Table D/E
Material ANSI CS A105/SA 105NSS 304/304L, 316/316L Alloy Steel: WHPY45/52/65/80
DIN CS RST37.2;S235JR SS 304/304L,316/316L
GOST CS CT20;16MN;SS 304/304L,316/316L
EN CS RST37.2;S235JR;C22.8SS 304/304L,316/316L
JIS SS400,SF440 SS 304/304L, 316/316L
BS CSRST37.2;S235JR;C22.8;Q235SS 304/304L,316/316L
Pressure ANSI Class 150, 300, 600, 900, 1500 2500lbs
DIN PN6,PN10,PN16,PN25,PN40,PN64,PN100
GOST PN6,PN10,PN16,PN25
EN PN6,PN10,PN16,PN25,PN40,PN64,PN100
JIS 1K,2K,5K,10K,16K,20K,30K,40K
BS PN6,PN10,PN16,PN25,PN40,PN64,PN100
Size ANSI 1/2” – 60”
DIN DN15-DN2000
GOST DN15-DN1600
EN DN15-DN2000
JIS 15A-1500A
BS DN15-DN2000
Coating varnish, yellow paint, anti-rust oil, galvanizing etc
Usage Used for the connection of all kinds of pipeline.
to convey the water, steam, air, gas and oil

Length:  Any length based on the customer's requirement.

Chemical composition % of the ladle analysis of grade Nistelle 625 and Standards

Nistelle 625
 
 
Composition:
 
  Co: Ni: Fe: Al: B: C: Cr:
  Bal. Max. 5 0.1 21.5
Mn: Mo: P: S: Si: Ti: W:
0.5 9  
 
 
Typical Hardness:
 
  <25 (S.H.T. or mill-annealed)
 
Typical Applications:
 
  A nickel-chromium-molybdenum alloy with an addition of niobium that acts with the molybdenum to stiffen the alloy's matrix and thereby provide high strength without a strengthening heat treatment. The alloy resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Used in chemical processing, aerospace and marine engineering, pollution-control equipment, and nuclear reactors.

Machining performance
Download Nistelle 625 the mechanical properties of the report, the report provides detailed performance analysis and application.


--------------------------------------------------------------------------------

Principal Design Features

One of the most widely used precipitation hardening grades in the business. While soft and ductile in the solution annealed condition, it is capable of high properties with a single precipitation or aging treatment. Characterized by good corrosion resistance, high harness, toughness and strength.


--------------------------------------------------------------------------------

Machinability

Long, gummy chips characterize this alloys machinability. It can be machined in the annealed condition, however condition H1150M will yield best results. Post machining solution treatment of parts will be required prior to final hardening if machining in this condition.


--------------------------------------------------------------------------------

Heat Treatment

CONDITION A--Soak at 1900 F (1038 C) for 30 minutes and cool below 60 F (16 C) for complete martensite transformation. CONDITION H 950- Treat Condition A material at 900 F(482 C) for 1 hour, air cool.. CONDITION H925, H1025, H1075, H1100, H1150- Soak solution treated material for 4 hours at specified temperature, air cool, CONDITION H1150M- Soak solution treated material at 1400 F (760 C) for 2 hours, air cool, then re-heat to 1150 F (620 C) for 4 hours and air cool.


--------------------------------------------------------------------------------

Welding

Successfully welded by common fusion and resistance methods, this alloy should not be joined by oxyacetylene welding. AWS E/ER630 filler metal is recommended if required.


--------------------------------------------------------------------------------

Forging

Soak for 1 hour at 2150 F (1177 C) prior to forging. Do not work below 1850 F (1010 C). Post-work solution treatment is required prior to final hardening.


--------------------------------------------------------------------------------


Hot tags:Nistelle 625 tube plate, Nistelle 625 Pipe Fitting, Nistelle 625 flange, Nistelle 625 Angle Bar,Nistelle 625 Valve,Nistelle 625 forgings

Related hot word search:Nistelle 625 Valve Nistelle 625 ,forging Nistelle 625 ,Nistelle 625 tube sheet,elbow Nistelle 625 ,Nistelle 625 flat bar,pipe Nistelle 625 ,Nistelle 625 Tee

Prev:Nistelle 718
Next:Deloro 60