- 1.0330 Valve
- 1.0330 Flange
- 1.0330 pipe fitting
- 1.0330 angle bar
- 1.0330 pipe
1.0330
1.0330 angle bars, 1.0330 flanges, Pipe Fitting, Steel Pipe, Heat Exchanger and Reducer, Gasket, Tee, Pipe Fitting, Tube Plate, have all specifications. With many yeas production experience, strict control 1.0330 chemical composition and 1.0330 mechanical properties.
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Angle bar: 1mm to 1300mm
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
Grade : | DC01 |
Number: | 1.0330 |
Standard: | EN 10130 : 2006 Cold rolled low carbon steel flat products for cold forming. Technical delivery conditions |
Classification: | Non-alloy quality steel |
Equivalent grades: | Go here |
Chemical composition % of the ladle analysis of grade DC01 (1.0330)
Unless otherwise agreed at the time of enquery and order, this grade may be supplied as Alloy steel (for example with boron or titanium) |
C | Mn | P | S |
max 0.12 | max 0.6 | max 0.045 | max 0.045 |
Mechanical properties of grade DC01 (1.0330)
Nominal thickness (mm) | - |
ReH - Minimum yield strength (MPa) | 280 |
Nominal thickness (mm) | - |
Rm -Tensile strength (MPa) | 270-410 |
Nominal thickness (mm) | - |
A - Minimum elongation Lo = Lo = 80 mm (%) | 28 |
Equivalent grades of grade DC01 (1.0330)
Germany DIN,WNr |
France AFNOR |
England BS |
European old EN |
Italy UNI |
Spain UNE |
China GB |
Sweden SS |
Russia GOST |
||||||||||
|
|
|
|
|
|
|
|
|
Related hot word search:1.0330 Valve 1.0330,forging 1.0330,1.0330 tube sheet,elbow 1.0330,1.0330 flat bar,pipe 1.0330,1.0330 Tee
Prev: DC01
Next:EN 10027-2