- Angle bar standard
- tube standard
- pipe standard
- sheet standard
- Valve standard
- flange standard
- pipe fitting standard
AISI Steel
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
AISI Steel
Data Table for:Products: stainless steel:AISI Steel
AISI Steel properties and heat treatment forged piece, Including AISI Steel application and specifications, Including AISI Steel steel plate, AISI Steel sheet, AISI Steel square steel, AISI Steel flat bar,AISI Steel Valve,AISI Steel forgings.
Introduction to Our Products:
Specialized high quality steel
We have the advantages of equipment, technologies and price
AISI Steel has the following specifications:
Steel pipe:
Size: OD: 9.5mm - 813mm WT: 0.8mm - 34mm Length: 1 - 13m, also can be customed.
Pipe fitting:
Size: 1/8 inch - 80 inch (DN6 - DN2000) WT: Sch5s - Sch160XXS
Flange:
Size: DN15-DN2000
Valve:
Diameter : 1mm-2000mm
Lenth:Any lenth based on the customer's requirement.
Chemical composition % of the ladle analysis of grade AISI Steel and Standards
AISI steel grades (American Iron & steel Institute) are becoming increasingly popular in the UK, primarily due to their use in the oil and gas industry. We hold a comprehensive range of stock in AISI material and AISI equivalent specifications. Of AISI steel grades available the majority are as carbon steels and Alloy steels. AISI carbon steels and Alloy steels are usually given a four digit number, the first two digits indicate the alloying element in the AISI specification and the last two digits indicate the amount of carbon in the specification. AISI materials grades are shown in the table below, as to how the four digit number indicates the type it refers to. |
Carbon steel |
10XX |
Plain carbon steel , Mn 1.00% max |
|
11XX |
Resulphurised free cutting |
|
12XX |
Resulphurised - Rephosphorised free cutting |
|
15XX |
Plain carbon steel, Mn 1.00-1.65% |
Manganese Steel |
13XX |
Mn 1.75% |
Nickel Steel |
23XX |
Ni 3.50% |
|
25XX |
Ni. 5.00% |
Nickel Chromium Steel |
31XX |
Ni 1.25%, Cr 0.65-0.80% |
|
32XX |
Ni 1.75%, Cr 1.07% |
|
33XX |
Ni 3.50%, Cr 1.50-1.57% |
|
34XX |
Ni 3.00%, Cr 0.77% |
Molybdenum Steel |
40XX |
Mo 0.20-0.25% |
|
44XX |
Mo 0.40-0.52% |
Chromium Molybdenum Steel |
41XX |
Cr 0.50-0.95%, Mo 0.12-0.30% |
Nickel Chromium Molybdenum Steel |
43XX |
Ni 1.82%, Cr 0.50-0.80%, Mo 0.25% |
|
47XX |
Ni 1.82%, Cr 0.50-0.80%, Mo 0.25% |
Nickel Molybdenum Steel |
46XX |
Ni 1.05%, Cr 0.45%, Mo 0.20-0.35% |
|
48XX |
Ni 0.85-1.82%, Mo 0.20-0.25% |
Chromium Steel |
50XX |
Ni 3.50%, Mo 0.25% |
|
51XX |
Cr 0.27-0.65% |
|
50XXX |
Cr 0.80-1.05% |
|
51XXX |
Cr 0.50% C 1.00% min |
|
52XXX |
Cr 1.02%, C 1.00% minCr 1.45%, C 1.00% |
Chromium Vanadium Steel |
61XX |
Cr 0.60-0.95%, V 0.10-0.15% |
Tungsten Chromium Steel |
72XX |
W 1.75%, Cr 0.75% |
Nickel Chromium Molybdenum Steel |
81XX |
Ni 0.30%, Cr 0.40%, Mo 0.12% |
|
86XX |
Ni 0.55%, Cr 0.50%, Mo 0.20% |
|
87XX |
Ni 0.55%, Cr 0.50%, Mo 0.25% |
|
88XX |
Ni 0.55% Cr 0.50% Mo 0.35% |
Silicon Manganese Steel |
92XX |
Si 1.40-2.00%, Mn 0.65-0.85% Cr 0.65% |
Nickel Chromium Molybdenum Steel |
93XX |
Ni 3.25%, Cr 1.20%, Mo 0.12% |
|
94XX |
Ni 0.45%, Cr 0.40%, Mo 0.12% |
|
97XX |
Ni 0.55%, Cr 0.20%, Mo 0.20% |
|
98XX |
Ni 1.00%, Cr 0.80%, Mo 0.25% |
It is possible that AISI grades are quoted as SAE grades and it is often that AISI/SAE have the same steel identification number. The AISI range of steel specifications also includes stainless steels which are 3 digit numbers starting with either a 2, 3, 4, or 5. The most popular of these being the 300 series austenitic stainless grades, followed by the 400 series martensitic grades. Also stocked are AISI equivalent grades of tool steel and high speed steel. AISI tool steel and high speed steel specifications are usually designated with a letter followed by 1 or 2 digits.
Machining performance
AISI Steel the mechanical properties of the report, the report provides detailed performance analysis and application.
Principal Design Features
One of the most widely used precipitation hardening grades in the business. While soft and ductile in the solution annealed condition, it is capable of high properties with a single precipitation or aging treatment. Characterized by good corrosion resistance, high harness, toughness and strength.
Machinability
Long, gummy chips characterize this alloys machinability. It can be machined in the annealed condition, however condition H1150M will yield best results. Post machining solution treatment of parts will be required prior to final hardening if machining in this condition.
Heat Treatment
CONDITION A--Soak at 1900 F (1038 C) for 30 minutes and cool below 60 F (16 C) for complete martensite transformation. CONDITION H 950- Treat Condition A material at 900 F(482 C) for 1 hour, air cool.. CONDITION H925, H1025, H1075, H1100, H1150- Soak solution treated material for 4 hours at specified temperature, air cool, CONDITION H1150M- Soak solution treated material at 1400 F (760 C) for 2 hours, air cool, then re-heat to 1150 F (620 C) for 4 hours and air cool.
Welding
Successfully welded by common fusion and resistance methods, this alloy should not be joined by oxyacetylene welding. AWS E/ER630 filler metal is recommended if required.
Forging
Soak for 1 hour at 2150 F (1177 C) prior to forging. Do not work below 1850 F (1010 C). Post-work solution treatment is required prior to final hardening.
Related hot word search:AISI Steel AISI Steel Valve,AISI Steel forging,AISI Steel sheet,AISI Steel coil,AISI Steel flat bar,AISI Steel pipe,AISI Steel Tee
Prev:Hardness Conversion Chart
Next:1.3912