- Angle bar standard
- tube standard
- pipe standard
- sheet standard
- Valve standard
- flange standard
- pipe fitting standard
Hard Magnetic Alloy
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
Alnico® 4 (Isotropic, Cast) Hard Magnetic Alloy
Categories: Metal; Electronic/Magnetic Alloy; Ferrous Metal
Material Notes: 56Fe-12Al-27Ni-5Co
Physical Properties Metric English Comments Density 7.00 g/cc 0.253 lb/in³ Mechanical Properties Metric English Comments Hardness, Rockwell C 45.0 45.0 Tensile Strength, Ultimate 63.0 MPa 9140 psi Modulus of Rupture 0.167 GPa 24.2 ksi Transverse Electrical Properties Metric English Comments Electrical Resistivity 0.0000750 ohm-cm 0.0000750 ohm-cm Magnetic Coercive Force, Hc 729 Oe 729 Oe Magnetic Remanence, Br 5350 Gauss 5350 Gauss Magnetic Maximum Energy Product, BH 1.26 MGOe 1.26 MGOe Curie Temperature 800 °C 1470 °F Thermal Properties Metric English Comments CTE, linear 13.1 µm/m-°C 7.28 µin/in-°F Maximum Service Temperature, Air 590 °C 1090 °F Component Elements Properties Metric English Comments Aluminum, Al 12.0 % 12.0 % Cobalt, Co 5.00 % 5.00 % Iron, Fe 56.0 % 56.0 % Nickel, Ni 27.0 % 27.0 % Descriptive Properties Demagnetization Induction, Bd (Tesla) 0.3 Intrinsic Magnetic Coercive Force, HCi (Oe) 779
Related hot word search:Hard Magnetic Alloy Hard Magnetic Alloy Valve,Hard Magnetic Alloy forging,Hard Magnetic Alloy sheet,Hard Magnetic Alloy coil,Hard Magnetic Alloy flat bar,Hard Magnetic Alloy pipe,Hard Magnetic Alloy Tee
Prev:Alloy Steel
Next:Alnico® 1