- 89Nb-10Hf-1Ti Valve
- 89Nb-10Hf-1Ti Flange
- 89Nb-10Hf-1Ti pipe fitting
- 89Nb-10Hf-1Ti angle bar
- 89Nb-10Hf-1Ti pipe
89Nb-10Hf-1Ti
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
Subcategory: Metal; Niobium Alloy; Nonferrous Metal; Refractory Metal
Key Words: Columbium Alloy
Component Wt. %
C Max 0.01
H Max 0.002
Hf 9 - 11
N Max 0.03
Component Wt. %
Nb 89
O Max 0.03
Ta Max 0.5
Component Wt. %
Ti 0.7 - 1.3
W Max 0.5
Zr Max 0.7
Physical Properties Metric English Comments
Density 8.87 g/cc 0.32 lb/in³
Mechanical Properties
Hardness, Brinell 219 219 Estimated from Vickers
Hardness, Knoop 243 243 Estimated from Vickers
Hardness, Rockwell B 97 97 Estimated from Vickers
Hardness, Rockwell C 18 18 Estimated from Vickers
Hardness, Vickers 230 230 Typical for Cb-103; Heat Treatment Unknown
Tensile Strength, Ultimate 640 MPa 92800 psi
Tensile Strength, Ultimate at Elevated Temperature 185 MPa 26800 psi 1093°C
Tensile Strength, Yield 605 MPa 87700 psi
Elongation at Break 9 % 9 % in 25 mm
Modulus of Elasticity 87 GPa 12600 ksi
Thermal Properties
CTE, linear 20°C 8.1 µm/m-°C 4.5 µin/in-°F 20-1205°C
CTE, linear 250°C 8.1 µm/m-°C 4.5 µin/in-°F 20-1205°C
CTE, linear 500°C 8.1 µm/m-°C 4.5 µin/in-°F 20-1205°C
CTE, linear 1000°C 8.1 µm/m-°C 4.5 µin/in-°F 20-1205°C
Specific Heat Capacity 0.34 J/g-°C 0.0813 BTU/lb-°F
Thermal Conductivity 41.9 W/m-K 291 BTU-in/hr-ft²-°F
Melting Point Max 2350 °C Max 4260 °F Liquidus
Liquidus 2350 °C 4260 °F
Related hot word search:89Nb-10Hf-1Ti Valve 89Nb-10Hf-1Ti,forging 89Nb-10Hf-1Ti,89Nb-10Hf-1Ti tube sheet,elbow 89Nb-10Hf-1Ti,89Nb-10Hf-1Ti flat bar,pipe 89Nb-10Hf-1Ti,89Nb-10Hf-1Ti Tee
Prev:WC 103
Next:JIS Z3252 DFCNi