- Ti-2.5Cu Valve
- Ti-2.5Cu Tee
- Ti-2.5Cu flange
- Ti-2.5Cu bars
- Ti-2.5Cu pipe
Ti-2.5Cu
Titanium IMI 230 (Ti-2.5Cu)
Categories: Metal; Nonferrous Metal; Titanium Alloy; Alpha/Near Alpha Titanium Alloy
Material Notes: Annealed; Aging increases Strength
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 4.56 g/cc | 0.165 lb/in³ | |
Mechanical Properties | Metric | English | Comments |
Tensile Strength, Ultimate | 620 MPa | 89900 psi | |
Tensile Strength, Yield | 480 MPa | 69600 psi | |
Elongation at Break | 24.0 % | 24.0 % | |
Modulus of Elasticity | 105 GPa | 15200 ksi | |
Poissons Ratio | 0.310 | 0.310 | Typical for alpha titanium alloy. |
Fatigue Strength |
280 MPa @# of Cycles 1.00e+7 |
40600 psi @# of Cycles 1.00e+7 |
|
Shear Modulus | 40.1 GPa | 5820 ksi | Calculated from typical values. |
Electrical Properties | Metric | English | Comments |
Electrical Resistivity | 0.0000650 ohm-cm | 0.0000650 ohm-cm | |
Thermal Properties | Metric | English | Comments |
CTE, linear |
9.02 µm/m-°C @Temperature 20.0 - 100 °C |
5.01 µin/in-°F @Temperature 68.0 - 212 °F |
|
9.10 µm/m-°C @Temperature 20.0 - 300 °C |
5.06 µin/in-°F @Temperature 68.0 - 572 °F |
average | |
9.46 µm/m-°C @Temperature 20.0 - 600 °C |
5.26 µin/in-°F @Temperature 68.0 - 1110 °F |
average | |
Specific Heat Capacity | 0.525 J/g-°C | 0.125 BTU/lb-°F | Typical value for titanium alloys. |
Thermal Conductivity | 13.0 W/m-K | 90.2 BTU-in/hr-ft²-°F | |
Beta Transus | 895 °C | 1640 °F | |
Component Elements Properties | Metric | English | Comments |
Carbon, C | <= 0.0800 % | <= 0.0800 % | |
Copper, Cu | 2.00 - 3.00 % | 2.00 - 3.00 % | |
Hydrogen, H | <= 0.0100 % | <= 0.0100 % | |
Iron, Fe | <= 0.200 % | <= 0.200 % | |
Nitrogen, N | <= 0.0500 % | <= 0.0500 % | |
Other, total | <= 0.400 % | <= 0.400 % | |
Oxygen, O | <= 0.200 % | <= 0.200 % | |
Titanium, Ti | 96.06 - 98.0 % | 96.06 - 98.0 % | As Balance; Elemental Compostions per ASTM B265 |
Users viewing this material also viewed the following:
Titanium Ti-6Al-2Sn-4Zr-2Mo-0.1Si; Duplex Annealed
Titanium Ti-3Al-2.5V (Grade 9), alpha annealed
Titanium IMI 230 (Ti-2.5Cu), aged
Titanium Ti-5Al-2.5Sn (Grade 6)
Titanium 11 (Ti-6Al-2Sn-1.5Zr-1Mo-0.35Bi-0.1Si)
MTA231 / 14121
Introduction to Our Products:
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Angle bar: 1mm to 1300mm
Pipe: 1 - 13M, also can be customed.
Pipe Fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
Mechanical properties
Heat treatment
Machining
Welding performance
Related hot word search: Valve Ti-2.5Cu,Tee Ti-2.5Cu,Ti-2.5Cu sheet,Reducer Ti-2.5Cu,Ti-2.5Cu bars,pipe Ti-2.5Cu,Ti-2.5Cu Reducers
Prev:Ti-2.3Al-11Sn-5Zr-1Mo-0.2Si
Next:Ti-5.5Al-4Sn-2Zr-1Mo-1Nd-0.25Si