Home > Ti Alloy > Ti-3Al-8V-6Cr-4Mo-4Zr Ti Alloy

Ti-3Al-8V-6Cr-4Mo-4Zr Ti Alloy

Ti-3Al-8V-6Cr-4Mo-4Zr Ti Alloy angle bars, Ti-3Al-8V-6Cr-4Mo-4Zr Ti Alloy flanges, Pipe Fitting, Steel Pipe, Heat Exchanger and Reducer, Gasket, Tee, Pipe Fitting, Tube Plate, have all specifications. With many yeas production experience, strict control Ti-3Al-8V-6Cr-4Mo-4Zr Ti Alloy chemical composition and Ti-3Al-8V-6Cr-4Mo-4Zr Ti Alloy mechanical properties.

Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.

Angle bar: 1mm to 1300mm
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.

ENQUIRY: Ti-3Al-8V-6Cr-4Mo-4Zr Ti Alloy

Ti-3Al-8V-6Cr-4Mo-4Zr properties and heat treatment forged piece, Including Ti-3Al-8V-6Cr-4Mo-4Zr application and specifications, Including Ti-3Al-8V-6Cr-4Mo-4Zr tube plate, Ti-3Al-8V-6Cr-4Mo-4Zr Pipe Fitting, Ti-3Al-8V-6Cr-4Mo-4Zr flange, Ti-3Al-8V-6Cr-4Mo-4Zr Angle Bar,Ti-3Al-8V-6Cr-4Mo-4Zr Valve,Ti-3Al-8V-6Cr-4Mo-4Zr 3d bend.

Ti-3Al-8V-6Cr-4Mo-4Zr has the following specifications:

Valve:
Diameter : 1mm-1300mm

Steel pipe:
Size: OD: 9.5mm - 813mm WT: 0.8mm - 34mm Length: 1 - 13m, also can be customed.

Items	seamless pipe & tube, pipe & tube
Standard	ASTM, GB, DIN, AISI, etc
Outer Diameter	Round pipe9.5mm--813mm
square	12.7x12.7--200X200mm
rectangular	20X40--150X200mm
Thickness	0.8mm - 34mm
Length	5.8m,6m, or as customers' request
Tolerance	a) Outer Diameter: +/- 0.2mm
	b) Thickness: +/- 0.02mm
	c) Length: +/- 5mm
Surface	180Grit, 320Grit, 400Grit Satin / Hairline
	400Grit, 500Grit, 600Grit Mirror finish
Application	Widely used in petroleum, Foodstuff, chemical industry, construction, electric power, nuclear energy, biotechnology, machinery, papermaking, shipbuilding, boiler fields, etc

Pipe fitting:
Size: 1/8 inch - 80 inch (DN6 - DN2000) WT: Sch5s - Sch160XXS

Items	Elbow,Equal Tee,Reducer Tee,Concentric Reducer,Eccentric Reducer,Cap,etc
Standard	ASME	ANSI B16.9,ANSI B16.28,MSS-SP-75
	DIN	DIN2605,DIN2615, DIN2616, DIN2617, DIN28011
	SGP	JISB2313
	EN	EN10253-1 EN10253-2
Material	ASME	A234 WPB,A234 WP1,A234 WP5,A234,WP9, A234 WPB11,A234 WPB12,A234 WPB22,WP91, A420,WPHY42,WPHY52,WPHY60,WPHY65, WPHY70,WP304,WP304L,WP304H,WP316, WP316L,WP321,WP347,WP347H
	DIN	ST37.0,ST35.8,ST45.8,S235JR,P235GH,P265GH, 10CrMo910,15CrMo,12Cr1MoV
	JIS	JIS G3454,STPG370,TPG410
Surface	Black paint/bright paint/Galvanized
Marking	As customer’s requirements

Flange:

Product Name	Flange
Items	Plate, Welding Neck, Slip on, Blind, Lap joint, Threaded Flange
Standard	ANSI	ANSI B16.5 ASME B16.47 series A/B
	DIN	DIN
	GOST	GOST 12820-80
	EN	EN1092-1:2002
	JIS	JIS B2220-2004, KS D3576, KS B6216 KS B1511-2007 JIS B2261; JIS B8210
	BS	BS4504 BS10 Table D/E
Material	ANSI	CS A105/SA 105NSS 304/304L, 316/316L Alloy Steel: WHPY45/52/65/80
	DIN	CS RST37.2;S235JR SS 304/304L,316/316L
	GOST	CS CT20;16MN;SS 304/304L,316/316L
	EN	CS RST37.2;S235JR;C22.8SS 304/304L,316/316L
	JIS	SS400,SF440 SS 304/304L, 316/316L
	BS	CSRST37.2;S235JR;C22.8;Q235SS 304/304L,316/316L
Pressure	ANSI	Class 150, 300, 600, 900, 1500 2500lbs
	DIN	PN6,PN10,PN16,PN25,PN40,PN64,PN100
	GOST	PN6,PN10,PN16,PN25
	EN	PN6,PN10,PN16,PN25,PN40,PN64,PN100
	JIS	1K,2K,5K,10K,16K,20K,30K,40K
	BS	PN6,PN10,PN16,PN25,PN40,PN64,PN100
Size	ANSI	1/2” – 60”
	DIN	DN15-DN2000
	GOST	DN15-DN1600
	EN	DN15-DN2000
	JIS	15A-1500A
	BS	DN15-DN2000
Coating	varnish, yellow paint, anti-rust oil, galvanizing etc
Usage	Used for the connection of all kinds of pipeline.
Usage	to convey the water, steam, air, gas and oil

Lenth: Any lenth based on the customer's requirement.

--------------------------------------------------------------------------------
Chemical composition % of the ladle analysis of grade Ti-3Al-8V-6Cr-4Mo-4Zr and Standards

Category Titanium Alloy
Class Wrought
Type Beta alloy

Composition
Element Weight %
Al 3
V 8
Cr 6
Mo 4
Zr 4

Mechanical Properties
Properties Conditions
T (°C) Treatment
Density (×1000 kg/m3) 4.82 25
Poisson's Ratio 0.33 25
Elastic Modulus (GPa) 105.5 25
Tensile Strength (Mpa) 883 25 annealed more
Yield Strength (Mpa) 834
Elongation (%) 15
Reduction in Area (%)
Hardness (HRC) 42 25 solution+ age
Impact Strength (J)
(Charpy) 10 25 solution+ age

Thermal Properties
Properties Conditions
T (°C) Treatment
Thermal Expansion (10-6/ºC) 9.68 20-425

--------------------------------------------------------------------------------

Machining performance

Ti-3Al-8V-6Cr-4Mo-4Zr the mechanical properties of the report, the report provides detailed performance analysis and application.

--------------------------------------------------------------------------------

Principal Design Features

One of the most widely used precipitation hardening grades in the business. While soft and ductile in the solution annealed condition, it is capable of high properties with a single precipitation or aging treatment. Characterized by good corrosion resistance, high harness, toughness and strength.

--------------------------------------------------------------------------------

Machinability

Long, gummy chips characterize this alloys machinability. It can be machined in the annealed condition, however condition H1150M will yield best results. Post machining solution treatment of parts will be required prior to final hardening if machining in this condition.

--------------------------------------------------------------------------------

Heat Treatment

CONDITION A--Soak at 1900 F (1038 C) for 30 minutes and cool below 60 F (16 C) for complete martensite transformation. CONDITION H 950- Treat Condition A material at 900 F(482 C) for 1 hour, air cool.. CONDITION H925, H1025, H1075, H1100, H1150- Soak solution treated material for 4 hours at specified temperature, air cool, CONDITION H1150M- Soak solution treated material at 1400 F (760 C) for 2 hours, air cool, then re-heat to 1150 F (620 C) for 4 hours and air cool.

--------------------------------------------------------------------------------

Welding

Successfully welded by common fusion and resistance methods, this alloy should not be joined by oxyacetylene welding. AWS E/ER630 filler metal is recommended if required.

--------------------------------------------------------------------------------

Forging

Soak for 1 hour at 2150 F (1177 C) prior to forging. Do not work below 1850 F (1010 C). Post-work solution treatment is required prior to final hardening.

--------------------------------------------------------------------------------

Hot tags:Ti-3Al-8V-6Cr-4Mo-4Zr tube plate, Ti-3Al-8V-6Cr-4Mo-4Zr Pipe Fitting, Ti-3Al-8V-6Cr-4Mo-4Zr flange, Ti-3Al-8V-6Cr-4Mo-4Zr Angle Bar,Ti-3Al-8V-6Cr-4Mo-4Zr Valve,Ti-3Al-8V-6Cr-4Mo-4Zr forgings

Prev:Ti-5AI-2Sn-2Zr-4Mo-4Cr Ti Alloy
Next:Ti-3Al-2.5V Ti Alloy

ENQUIRY: Ti-3Al-8V-6Cr-4Mo-4Zr Ti Alloy

Ti-3Al-8V-6Cr-4Mo-4Zr Ti Alloy

Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.

Top

Month Top

Ti-3Al-8V-6Cr-4Mo-4Zr Ti Alloy

Production specification Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.

Users viewing this material also viewed the following:

Top

Month Top

Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.