- AFNOR 06-05-04-02 Valve
- AFNOR 06-05-04-02 Flange
- AFNOR 06-05-04-02 pipe fitting
- AFNOR 06-05-04-02 angle bar
- AFNOR 06-05-04-02 pipe
AFNOR 06-05-04-02
AFNOR 06-05-04-02 angle bars, AFNOR 06-05-04-02 flanges, Pipe Fitting, Steel Pipe, Heat Exchanger and Reducer, Gasket, Tee, Pipe Fitting, Tube Plate, have all specifications. With many yeas production experience, strict control AFNOR 06-05-04-02 chemical composition and AFNOR 06-05-04-02 mechanical properties.
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Angle bar: 1mm to 1300mm
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
DATA TABLE FOR:TOOL STEEL:AFNOR 06-05-04-02
Steel grade type | Tool steel: |
---|---|
Standard | AFNOR |
Production specifications | Tube Plate,Steel Pipe/Tube, Reducer,Angle Bar,Valve, Pipe Fittng, Flange, Heat Exchanger. |
Range of work
|
Steel pipe: Pipe fitting: Flange: Valve: Lenth: Any lenth based on the customer's requirement.
|
Surface treatment | Transparent oil, rust-proof black oil or hot galvanized, etc |
AFNOR 06-05-04-02 CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES
Element | Weight % |
C | 0.78-1.05 |
Mn | 0.15-0.40 |
Si | 0.20-0.45 |
Cr | 3.75-4.50 |
Ni | 0.3 |
Mo | 4.50-5.50 |
W | 5.50-6.75 |
V | 1.75-2.20 |
Cu | 0.25 |
P | 0.03 |
S | 0.03 |
Mechanical Properties
Properties | Conditions | ||
---|---|---|---|
T (°C) | Treatment | ||
Density (×1000 kg/m3) | 7.7-8.03 | 25 | |
Poisson's Ratio | 0.27-0.30 | 25 | |
Elastic Modulus (GPa) | 190-210 | 25 | |
Tensile Strength (Mpa) | 1158 | 25 | oil quenched, fine grained, tempered at 425°C |
Yield Strength (Mpa) | 1034 | ||
Elongation (%) | 15 | ||
Reduction in Area (%) | 53 | ||
Hardness (HB) | 335 | 25 | oil quenched, fine grained, tempered at 425°C |
THERMAL PROPERTIES
Properties | Conditions | ||
---|---|---|---|
T (°C) | Treatment | ||
Thermal Conductivity (W/m-K) | 42.7 | 100 | |
Specific Heat (J/kg-K) | 477 | 50-100 |
PHYSICAL PROPERTIES
Quantity | Value | Unit |
---|---|---|
Thermal expansion | 16 - 17 | e-6/K |
Thermal conductivity | 16 - 16 | W/m.K |
Specific heat | 500 - 500 | J/kg.K |
Melting temperature | 1370 - 1400 | °C |
Service temperature | 0 - 500 | °C |
Density | 8000 - 8000 | kg/m3 |
Resistivity | 0.7 - 0.7 | Ohm.mm2/m |
Related hot word search:AFNOR 06-05-04-02 Valve AFNOR 06-05-04-02,forging AFNOR 06-05-04-02,AFNOR 06-05-04-02 tube sheet,elbow AFNOR 06-05-04-02,AFNOR 06-05-04-02 flat bar,pipe AFNOR 06-05-04-02,AFNOR 06-05-04-02 Tee
Prev:AFNOR 07-05-04-04-02
Next:SS 2722
Month Top
- 7SK85M
- 6SS 2260
- 5STELLITE NO.6
- 5SMF166
- 5CPM 3V
- 5ASP 2005
- 51.2442
- 5SK85
- 545NiCrMo16
- 445SiCrMo6