- AFNOR 08-04-02-01 Valve
- AFNOR 08-04-02-01 Flange
- AFNOR 08-04-02-01 pipe fitting
- AFNOR 08-04-02-01 angle bar
- AFNOR 08-04-02-01 pipe
AFNOR 08-04-02-01
AFNOR 08-04-02-01 angle bars, AFNOR 08-04-02-01 flanges, Pipe Fitting, Steel Pipe, Heat Exchanger and Reducer, Gasket, Tee, Pipe Fitting, Tube Plate, have all specifications. With many yeas production experience, strict control AFNOR 08-04-02-01 chemical composition and AFNOR 08-04-02-01 mechanical properties.
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Angle bar: 1mm to 1300mm
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
DATA TABLE FOR:TOOL STEEL:AFNOR 08-04-02-01
Steel grade type | Tool steel: |
---|---|
Standard | AFNOR |
Production specifications | Tube Plate,Steel Pipe/Tube, Reducer,Angle Bar,Valve, Pipe Fittng, Flange, Heat Exchanger. |
Range of work
|
Steel pipe: Pipe fitting: Flange: Valve: Lenth: Any lenth based on the customer's requirement.
|
Surface treatment | Transparent oil, rust-proof black oil or hot galvanized, etc |
AFNOR 08-04-02-01 CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES
Element | Weight % |
C | 0.78-0.88 |
Mn | 0.15-0.40 |
Si | 0.20-0.50 |
Cr | 3.50-4.00 |
Ni | 0.3 |
Mo | 8.20-9.20 |
W | 1.40-2.10 |
V | 1.00-1.35 |
Cu | 0.25 |
P | 0.03 |
S | 0.03 |
Mechanical Properties
Properties | Conditions | ||
---|---|---|---|
T (°C) | Treatment | ||
Density (×1000 kg/m3) | 7.7-8.03 | 25 | |
Poisson's Ratio | 0.27-0.30 | 25 | |
Elastic Modulus (GPa) | 190-210 | 25 | |
Tensile Strength (Mpa) | 1158 | 25 | oil quenched, fine grained, tempered at 425°C |
Yield Strength (Mpa) | 1034 | ||
Elongation (%) | 15 | ||
Reduction in Area (%) | 53 | ||
Hardness (HB) | 335 | 25 | oil quenched, fine grained, tempered at 425°C |
THERMAL PROPERTIES
Properties | Conditions | ||
---|---|---|---|
T (°C) | Treatment | ||
Thermal Conductivity (W/m-K) | 42.7 | 100 | |
Specific Heat (J/kg-K) | 477 | 50-100 |
PHYSICAL PROPERTIES
Quantity | Value | Unit |
---|---|---|
Thermal expansion | 16 - 17 | e-6/K |
Thermal conductivity | 16 - 16 | W/m.K |
Specific heat | 500 - 500 | J/kg.K |
Melting temperature | 1370 - 1400 | °C |
Service temperature | 0 - 500 | °C |
Density | 8000 - 8000 | kg/m3 |
Resistivity | 0.7 - 0.7 | Ohm.mm2/m |
Related hot word search:AFNOR 08-04-02-01 Valve AFNOR 08-04-02-01,forging AFNOR 08-04-02-01,AFNOR 08-04-02-01 tube sheet,elbow AFNOR 08-04-02-01,AFNOR 08-04-02-01 flat bar,pipe AFNOR 08-04-02-01,AFNOR 08-04-02-01 Tee
Prev:AFNOR 18-04-01
Next:AFNOR 07-05-04-04-02
Month Top
- 7SK85M
- 6SS 2260
- 5STELLITE NO.6
- 5SMF166
- 5CPM 3V
- 5ASP 2005
- 51.2442
- 5SK85
- 545NiCrMo16
- 445SiCrMo6