- AISI H13 TOOL STEEL Valve
- AISI H13 TOOL STEEL Flange
- AISI H13 TOOL STEEL pipe fitting
- AISI H13 TOOL STEEL angle bar
- AISI H13 TOOL STEEL pipe
AISI H13 TOOL STEEL
AISI H13 TOOL STEEL angle bars, AISI H13 TOOL STEEL flanges, Pipe Fitting, Steel Pipe, Heat Exchanger and Reducer, Gasket, Tee, Pipe Fitting, Tube Plate, have all specifications. With many yeas production experience, strict control AISI H13 TOOL STEEL chemical composition and AISI H13 TOOL STEEL mechanical properties.
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Angle bar: 1mm to 1300mm
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
DATA TABLE FOR:TOOL STEEL:AISI H13 TOOL STEEL
Steel grade type | Tool steel: |
---|---|
Standard | AISI |
Production specifications | Tube Plate,Steel Pipe/Tube, Reducer,Angle Bar,Valve, Pipe Fittng, Flange, Heat Exchanger. |
Range of work
|
Steel pipe: Pipe fitting: Flange: Valve: Lenth: Any lenth based on the customer's requirement.
|
Surface treatment | Transparent oil, rust-proof black oil or hot galvanized, etc |
AISI H13 TOOL STEEL CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES
Element | Weight % |
C | 0.32-0.45 |
Mn | 0.20-0.50 |
Si | 0.80-1.20 |
Cr | 4.75-5.50 |
Ni | 0.3 |
Mo | 1.10-1.75 |
V | 0.80-1.20 |
Cu | 0.25 |
P | 0.03 |
S | 0.03 |
Mechanical Properties
Properties | Conditions | ||
---|---|---|---|
T (°C) | Treatment | ||
Density (×1000 kg/m3) | 7.7-8.03 | 25 | |
Poisson's Ratio | 0.27-0.30 | 25 | |
Elastic Modulus (GPa) | 190-210 | 25 | |
Tensile Strength (Mpa) | 1158 | 25 | oil quenched, fine grained, tempered at 425°C |
Yield Strength (Mpa) | 1034 | ||
Elongation (%) | 15 | ||
Reduction in Area (%) | 53 | ||
Hardness (HB) | 335 | 25 | oil quenched, fine grained, tempered at 425°C |
THERMAL PROPERTIES
Properties | Conditions | ||
---|---|---|---|
T (°C) | Treatment | ||
Thermal Conductivity (W/m-K) | 42.7 | 100 | |
Specific Heat (J/kg-K) | 477 | 50-100 |
PHYSICAL PROPERTIES
Quantity | Value | Unit |
---|---|---|
Thermal expansion | 16 - 17 | e-6/K |
Thermal conductivity | 16 - 16 | W/m.K |
Specific heat | 500 - 500 | J/kg.K |
Melting temperature | 1370 - 1400 | °C |
Service temperature | 0 - 500 | °C |
Density | 8000 - 8000 | kg/m3 |
Resistivity | 0.7 - 0.7 | Ohm.mm2/m |
Related hot word search:AISI H13 Valve AISI H13 TOOL STEEL,forging AISI H13 TOOL STEEL,AISI H13 TOOL STEEL tube sheet,elbow AISI H13 TOOL STEEL,AISI H13 TOOL STEEL flat bar,pipe AISI H13 TOOL STEEL,AISI H13 TOOL STEEL Tee
Prev:AISI H14 TOOL STEEL
Next:AISI H12 TOOL STEEL
Month Top
- 7SK85M
- 6SS 2260
- 5STELLITE NO.6
- 5SMF166
- 5CPM 3V
- 5ASP 2005
- 51.2442
- 5SK85
- 545NiCrMo16
- 445SiCrMo6