- DIN 1.2510 Valve
- DIN 1.2510 Flange
- DIN 1.2510 pipe fitting
- DIN 1.2510 angle bar
- DIN 1.2510 pipe
DIN 1.2510
DIN 1.2510 angle bars, DIN 1.2510 flanges, Pipe Fitting, Steel Pipe, Heat Exchanger and Reducer, Gasket, Tee, Pipe Fitting, Tube Plate, have all specifications. With many yeas production experience, strict control DIN 1.2510 chemical composition and DIN 1.2510 mechanical properties.
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Angle bar: 1mm to 1300mm
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
DATA TABLE FOR:TOOL STEEL:DIN 1.2510
Steel grade type | Tool steel: |
---|---|
Standard | DIN |
Production specifications | Tube Plate,Steel Pipe/Tube, Reducer,Angle Bar,Valve, Pipe Fittng, Flange, Heat Exchanger. |
Range of work
|
Steel pipe: Pipe fitting: Flange: Valve: Lenth: Any lenth based on the customer's requirement.
|
Surface treatment | Transparent oil, rust-proof black oil or hot galvanized, etc |
DIN 1.2510 CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES
Element | Weight % |
C | 0.85-1.00 |
Mn | 1.00-1.40 |
Si | 0.50 |
Cr | 0.40-0.60 |
Ni | 0.30 |
W | 0.40-0.60 |
V | 0.30 |
Cu | 0.25 |
P | 0.03 |
S | 0.03 |
Mechanical Properties
Properties | Conditions | ||
---|---|---|---|
T (°C) | Treatment | ||
Density (×1000 kg/m3) | 7.7-8.03 | 25 | |
Poisson's Ratio | 0.27-0.30 | 25 | |
Elastic Modulus (GPa) | 190-210 | 25 | |
Tensile Strength (Mpa) | 1158 | 25 | oil quenched, fine grained, tempered at 425°C |
Yield Strength (Mpa) | 1034 | ||
Elongation (%) | 15 | ||
Reduction in Area (%) | 53 | ||
Hardness (HB) | 335 | 25 | oil quenched, fine grained, tempered at 425°C |
THERMAL PROPERTIES
Properties | Conditions | ||
---|---|---|---|
T (°C) | Treatment | ||
Thermal Conductivity (W/m-K) | 42.7 | 100 | |
Specific Heat (J/kg-K) | 477 | 50-100 |
PHYSICAL PROPERTIES
Quantity | Value | Unit |
---|---|---|
Thermal expansion | 16 - 17 | e-6/K |
Thermal conductivity | 16 - 16 | W/m.K |
Specific heat | 500 - 500 | J/kg.K |
Melting temperature | 1370 - 1400 | °C |
Service temperature | 0 - 500 | °C |
Density | 8000 - 8000 | kg/m3 |
Resistivity | 0.7 - 0.7 | Ohm.mm2/m |
Related hot word search:DIN 1.2510 Valve DIN 1.2510,forging DIN 1.2510,DIN 1.2510 tube sheet,elbow DIN 1.2510,DIN 1.2510 flat bar,pipe DIN 1.2510,DIN 1.2510 Tee
Prev:DIN 1.2550
Next:DIN 1.2379
Month Top
- 7SK85M
- 6SS 2260
- 5STELLITE NO.6
- 5SMF166
- 5CPM 3V
- 5ASP 2005
- 51.2442
- 5SK85
- 545NiCrMo16
- 445SiCrMo6