- DIN 1.3246 Valve
- DIN 1.3246 Flange
- DIN 1.3246 pipe fitting
- DIN 1.3246 angle bar
- DIN 1.3246 pipe
DIN 1.3246
DIN 1.3246 angle bars, DIN 1.3246 flanges, Pipe Fitting, Steel Pipe, Heat Exchanger and Reducer, Gasket, Tee, Pipe Fitting, Tube Plate, have all specifications. With many yeas production experience, strict control DIN 1.3246 chemical composition and DIN 1.3246 mechanical properties.
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Angle bar: 1mm to 1300mm
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
DATA TABLE FOR:TOOL STEEL:DIN 1.3246
Steel grade type | Tool steel: |
---|---|
Standard | DIN |
Production specifications | Tube Plate,Steel Pipe/Tube, Reducer,Angle Bar,Valve, Pipe Fittng, Flange, Heat Exchanger. |
Range of work
|
Steel pipe: Pipe fitting: Flange: Valve: Lenth: Any lenth based on the customer's requirement.
|
Surface treatment | Transparent oil, rust-proof black oil or hot galvanized, etc |
DIN 1.3246 CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES
Element | Weight % |
C | 1.05-1.15 |
Mn | 0.20-0.60 |
Si | 0.15-0.50 |
Cr | 3.75-4.50 |
Ni | 0.3 |
Mo | 3.25-4.25 |
W | 6.25-7.00 |
V | 1.75-2.25 |
Co | 4.75-5.75 |
Cu | 0.25 |
P | 0.03 |
S | 0.03 |
Mechanical Properties
Properties | Conditions | ||
---|---|---|---|
T (°C) | Treatment | ||
Density (×1000 kg/m3) | 7.7-8.03 | 25 | |
Poisson's Ratio | 0.27-0.30 | 25 | |
Elastic Modulus (GPa) | 190-210 | 25 | |
Tensile Strength (Mpa) | 1158 | 25 | oil quenched, fine grained, tempered at 425°C |
Yield Strength (Mpa) | 1034 | ||
Elongation (%) | 15 | ||
Reduction in Area (%) | 53 | ||
Hardness (HB) | 335 | 25 | oil quenched, fine grained, tempered at 425°C |
THERMAL PROPERTIES
Properties | Conditions | ||
---|---|---|---|
T (°C) | Treatment | ||
Thermal Conductivity (W/m-K) | 42.7 | 100 | |
Specific Heat (J/kg-K) | 477 | 50-100 |
PHYSICAL PROPERTIES
Quantity | Value | Unit |
---|---|---|
Thermal expansion | 16 - 17 | e-6/K |
Thermal conductivity | 16 - 16 | W/m.K |
Specific heat | 500 - 500 | J/kg.K |
Melting temperature | 1370 - 1400 | °C |
Service temperature | 0 - 500 | °C |
Density | 8000 - 8000 | kg/m3 |
Resistivity | 0.7 - 0.7 | Ohm.mm2/m |
Related hot word search:DIN 1.3246 Valve DIN 1.3246,forging DIN 1.3246,DIN 1.3246 tube sheet,elbow DIN 1.3246,DIN 1.3246 flat bar,pipe DIN 1.3246,DIN 1.3246 Tee
Prev:DIN 1.3249
Next:DIN 1.3202
Month Top
- 7SK85M
- 6SS 2260
- 5STELLITE NO.6
- 5SMF166
- 5CPM 3V
- 5ASP 2005
- 51.2442
- 5SK85
- 545NiCrMo16
- 445SiCrMo6