- DIN 1.3355 Valve
- DIN 1.3355 Flange
- DIN 1.3355 pipe fitting
- DIN 1.3355 angle bar
- DIN 1.3355 pipe
DIN 1.3355
DIN 1.3355 angle bars, DIN 1.3355 flanges, Pipe Fitting, Steel Pipe, Heat Exchanger and Reducer, Gasket, Tee, Pipe Fitting, Tube Plate, have all specifications. With many yeas production experience, strict control DIN 1.3355 chemical composition and DIN 1.3355 mechanical properties.
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Angle bar: 1mm to 1300mm
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
DATA TABLE FOR:TOOL STEEL:DIN 1.3355
Steel grade type | Tool steel: |
---|---|
Standard | DIN |
Production specifications | Tube Plate,Steel Pipe/Tube, Reducer,Angle Bar,Valve, Pipe Fittng, Flange, Heat Exchanger. |
Range of work
|
Steel pipe: Pipe fitting: Flange: Valve: Lenth: Any lenth based on the customer's requirement.
|
Surface treatment | Transparent oil, rust-proof black oil or hot galvanized, etc |
DIN 1.3355 CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES
Element | Weight % |
C | 0.65-0.80 |
Mn | 0.10-0.40 |
Si | 0.20-0.40 |
Cr | 3.75-4.00 |
Ni | 0.3 |
W | 17.25-18.75 |
V | 0.90-1.30 |
Cu | 0.25 |
P | 0.03 |
S | 0.03 |
Mechanical Properties
Properties | Conditions | ||
---|---|---|---|
T (°C) | Treatment | ||
Density (×1000 kg/m3) | 7.7-8.03 | 25 | |
Poisson's Ratio | 0.27-0.30 | 25 | |
Elastic Modulus (GPa) | 190-210 | 25 | |
Tensile Strength (Mpa) | 1158 | 25 | oil quenched, fine grained, tempered at 425°C |
Yield Strength (Mpa) | 1034 | ||
Elongation (%) | 15 | ||
Reduction in Area (%) | 53 | ||
Hardness (HB) | 335 | 25 | oil quenched, fine grained, tempered at 425°C |
THERMAL PROPERTIES
Properties | Conditions | ||
---|---|---|---|
T (°C) | Treatment | ||
Thermal Conductivity (W/m-K) | 42.7 | 100 | |
Specific Heat (J/kg-K) | 477 | 50-100 |
PHYSICAL PROPERTIES
Quantity | Value | Unit |
---|---|---|
Thermal expansion | 16 - 17 | e-6/K |
Thermal conductivity | 16 - 16 | W/m.K |
Specific heat | 500 - 500 | J/kg.K |
Melting temperature | 1370 - 1400 | °C |
Service temperature | 0 - 500 | °C |
Density | 8000 - 8000 | kg/m3 |
Resistivity | 0.7 - 0.7 | Ohm.mm2/m |
Related hot word search:DIN 1.3355 Valve DIN 1.3355,forging DIN 1.3355,DIN 1.3355 tube sheet,elbow DIN 1.3355,DIN 1.3355 flat bar,pipe DIN 1.3355,DIN 1.3355 Tee
Prev:AISI H10 TOOL STEEL
Next:DIN 1.3348
Month Top
- 7SK85M
- 6SS 2260
- 5STELLITE NO.6
- 5SMF166
- 5CPM 3V
- 5ASP 2005
- 51.2442
- 5SK85
- 545NiCrMo16
- 445SiCrMo6