Home > Tool steel > JIS SKH9

JIS SKH9

JIS SKH9 angle bars, JIS SKH9 flanges, Pipe Fitting, Steel Pipe, Heat Exchanger and Reducer, Gasket, Tee, Pipe Fitting, Tube Plate, have all specifications. With many yeas production experience, strict control JIS SKH9 chemical composition and JIS SKH9 mechanical properties.

Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.

Angle bar: 1mm to 1300mm
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.

ENQUIRY: JIS SKH9

DATA TABLE FOR:TOOL STEEL:JIS SKH9

Steel grade type	Tool steel:
Standard	JIS
Production specifications	Tube Plate,Steel Pipe/Tube, Reducer,Angle Bar,Valve, Pipe Fittng, Flange, Heat Exchanger.
Range of work	Steel pipe: Size: OD: 9.5mm - 813mm WT: 0.8mm - 34mm Length: 1 - 13m, also can be customed. Pipe fitting: Size: 1/8 inch - 80 inch (DN6 - DN2000) WT: Sch5s - Sch160XXS Flange: Size: DN15-DN2000 Valve: Diameter : 1mm-2000mm Lenth: Any lenth based on the customer's requirement.
Surface treatment	Transparent oil, rust-proof black oil or hot galvanized, etc

JIS SKH9 CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES

Element	Weight %
C	0.78-1.05
Mn	0.15-0.40
Si	0.20-0.45
Cr	3.75-4.50
Ni	0.3
Mo	4.50-5.50
W	5.50-6.75
V	1.75-2.20
Cu	0.25
P	0.03
S	0.03

Mechanical Properties

Properties		Conditions
Properties		T (°C)	Treatment
Density (×1000 kg/m3)	7.7-8.03	25
Poisson's Ratio	0.27-0.30	25
Elastic Modulus (GPa)	190-210	25
Tensile Strength (Mpa)	1158	25	oil quenched, fine grained, tempered at 425°C
Yield Strength (Mpa)	1034
Elongation (%)	15
Reduction in Area (%)	53
Hardness (HB)	335	25	oil quenched, fine grained, tempered at 425°C

THERMAL PROPERTIES

Properties		Conditions
Properties		T (°C)	Treatment
Thermal Conductivity (W/m-K)	42.7	100
Specific Heat (J/kg-K)	477	50-100

PHYSICAL PROPERTIES

Quantity	Value	Unit
Thermal expansion	16 - 17	e-6/K
Thermal conductivity	16 - 16	W/m.K
Specific heat	500 - 500	J/kg.K
Melting temperature	1370 - 1400	°C
Service temperature	0 - 500	°C
Density	8000 - 8000	kg/m3
Resistivity	0.7 - 0.7	Ohm.mm2/m

Prev:DIN 1.2080
Next:JIS SKH3

ENQUIRY: JIS SKH9

JIS SKH9

Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.

DATA TABLE FOR:TOOL STEEL:JIS SKH9

JIS SKH9 CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES

Mechanical Properties

THERMAL PROPERTIES

PHYSICAL PROPERTIES

Top

Month Top

JIS SKH9

Production specification Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.

DATA TABLE FOR:TOOL STEEL:JIS SKH9

JIS SKH9 CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES

Mechanical Properties

THERMAL PROPERTIES

PHYSICAL PROPERTIES

Users viewing this material also viewed the following:

Top

Month Top

Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.