How to control the welding of spiral welded pipe

Generally speaking, the welded steel pipes are divided into general welded pipe, galvanized welded pipe, oxygen welding pipe, metric system welded tube, transformer tube, welding thin wall pipe and spiral welded pipe etc.

Generally, Controlling the shape of the weld is by adjusting welding current, arc voltage, welding speed, welding wire extension, welding wire Angle and welding head offset. 

1, the welding current on weld penetration and bead height is very significant. The larger the current, the greater the penetration, the weld height is greater.

2, the arc voltage and wire elongation has a greater impact on the weld width. The greater the Arc voltage, the larger the wire elongation. 

3, the welding speed, the smaller the bead width, penetration depth is smaller. 

4, the wire angle has great influence on the weld shape. Welding wire is in the direction of deviation from the vertical, weld penetration increased width decreases; if the wire deflection departure from the welding direction, the weld penetration depth decreases and the width increases. 

5, the welding head offset is welded to the pipe center point of the horizontal radial distance, the shape of the weld is also great. This is the spiral submerged arc welded pipe -specific issues. Spiral pipe in the spiral tube for welding under a state of movement, there is a circumferential steel rotating movement, which will cause the flow of molten iron bath, the impact of weld. Select the appropriate offset to help weld with satisfactory appearance and shape, if the offset is greater and the bead height is smaller , as well as side to side mobility trends within the weld and weld middle sag larger trend.