News
Credibility ,Description
Oval Ring Joint Gasket
|
Octagonal Ring Joint Gasket
|
RX Ring Joint Gasket
|
BX Ring Joint Gasket |
Material of construction
Soft Iron, Low Carbon Steel, Stainless Steel 304, Stainless Steel 304L Stainless Steel 316, Stainless Steel 316L, Stainless Steel 321, Stainless Steel 347, Stainless Steel 410, Aluminum, Copper, Brass, Nickel 200, Monel 400, Inconel 600, Hastelloy B2, Titanium
Standard Marking
* Manufacturer
* Nominal Size & Pressure Range
* Material
* Manufacturer to which standard
BX Ring Joint Gasket
The type BX energized ring type joints, manufactured in accordance with API 6A, are designed for use on pressurized systems up to 20,000 psi.
When correctly fitted, the type BX gasket allows virtual face to face contact of the flange faces which means that the gasket in fully trapped on both the inner and outer diameters.
All BX gasket incorporate a pressure balance hole to ensure equalization of pressure which may be trapped in the grooves.
Tolerances (Inches)
> "A" Width of ring: +0.008-0.000
> "D" Height of ring: +/-0.002
> "OD" Outer dimension of ring: +0.000,-0.005
> "23o" Angle: +/- 1/2o
Standard
Standard style BX ring type joints are manufactured in accordance with both API 6A and ASME B16.20 size and ratings. Available in both oval and octagonal configurations, both types are interchangeable on the modern octagonal type grooved flanges
As with all metal ring type joints including style BX, it is recommended to replace the ring when flange connection is broken.
RX Ring Joint Gasket
The style RX is an adaptation of the standard style R which energizes on assembly. The RX is designed to fit the same groove design as a standard style R, making the joints interchangeable.
Consideration should be given to the difference in finished make-up distance.
The modified design uses an energizing on assembly effect with improves the efficiency of the seal.
Tolerances (Inches)
> "A" Width of ring: +0.008-0.008
> "H" Height of ring: +0.008-0.000
> "OD" Outer dimension of ring: +0.020,-0.000
> "23o" Angle: +/- 1/2o
Standard
Standard style R ring type joints are manufactured in accordance with both API 6A and ASME B16.20 size and ratings. Available in both oval and octagonal configurations, both types are interchangeable on the modern octagonal type grooved flanges.
As with all metal ring type joints including style RX, it is recommended to replace the ring when flange connection is broken.
Tel No:+86-18267732328 / Email:[email protected]
Address:Longwan District, Wenzhou, Zhejiang Province, China.
Copyright Notice © www.yaang.com Yaang Pipe Industry Co., Limited All rights reserved.
Yaang Pipe Industry Co., Ltd. is an international supplier of piping solutions for flange, butt welding fittings, socket welding fittings and threaded fittings. Our products are widely used in different industrial fields, including oil and gas, chemical industry, petrochemical industry, power plant, pulp and paper industry, environmental and water conservancy engineering, engineering projects, etc.