1. Material: 316L Stainless Steel, etc
2. Size: 1"
3. Standard: ANSI, etc
4. Type: F316L RTJ Flange
5. Pressure: 150#, 300#, 600#, etc
Lap Joint Flange is always used with either a stub end or taft which is butt welded to the pipe
with the flange loose behind it. This means the stub end or taft always makes the face.
The lap joint flange is favoured in low pressure applications because it is easily assembled and aligned.
To reduce cost these flanges can be supplied without a hub and/or in treated, coated stainless steel.
Stainless steel 316L Chemical Composition %
Grade |
|
C |
Mn |
Si |
P |
S |
Cr |
Mo |
Ni |
N |
316L |
Min |
- |
- |
- |
- |
- |
16.0 |
2.00 |
10.0 |
- |
Max |
0.03 |
2.0 |
0.75 |
0.045 |
0.03 |
18.0 |
3.00 |
14.0 |
0.10 |