Z120M12

X120Mn12 Z120M12 1.3401 stainless steel

Forming:
Forming can be carried out without difficulty, as the plate in the supplied condition is ductile. To avoid cracking, edges which have been work hardened by shearing should have a 2 to 3mm chamfer ground along the edge to be formed. If possible, forming should be carried out in one operation in order to avoid work hardening.

Drilling:
High manganese steel is difficult to drill due to the 11 to 14% manganese content and will work harden very quickly. Heavy duty, very rigid machinery is required using either armour piercing drills in 8% cobalt high speed steel, or preferably, use special drills with replaceable carbide inserts. Avoid centre punching or allowing the drill to rub on the surface without the feed being engaged, as this has the effect of work hardening. 

Welding:
Welding should be carried out using E308Mo type austenitic stainless consumables. As a high manganese steel with high coefficient of thermal expansion and low thermal conductivity, Welding should be carried out at a low thermal value. Prolonged time of the material in the temperature range of 300°C to 800°C can cause embrittlement due to carbide precipitation.

Product description:

Step Shaft X120Mn12 Z120M12 1.3401 Tube X120Mn12 Z120M12 1.3401 Pie-shaped X120Mn12 Z120M12 1.3401  Ring X120Mn12 Z120M12 1.3401  Module Large valves of the main X120Mn12 Z120M12 1.3401 Other Profiled forgings X120Mn12 Z120M12 1.3401  

Stainless steel, Hi-Steel HSLA-80, Mould steel,  Heat resistant steel, Tool steel, Ball bearing steel,Spring steel,  Alloy steel,  Construction steel,  Die steel, High-speed steel,  angles, flanges, tube sheet, tee, welded pipes, seamless tubes

Standard:
Chinese GB, Japanese JIS, US ASTM, UK BS, EU DIN standards and so on.

Products Introduction:

Specifications

Valve:
Diameter : 1mm-2000mm

Steel pipe:
Size: OD: 9.5mm - 813mm WT: 0.8mm - 34mm Length: 1 - 13m, also can be customed.

Pipe fitting:
Size: 1/8 inch - 80 inch (DN6 - DN2000) WT: Sch5s - Sch160XXS

Flange:
Size: DN15-DN2000.

Length:  Any length based on the customer's requirement.