- ISO TC70 Valve
- ISO TC70 flanges
- ISO TC70 tube sheet
- ISO TC70 angle bar
- ISO TC70 pipe
ISO TC70
ISO TC70 flanges, have all specifications. ISO TC70 chemical composition and ISO TC70 mechanical properties.
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Valve: 1mm to 1300mm
pipe: 1mm to 1300mm
pipe Fitting Size:1/8" -96"
Flange Size:1/8" -96"
Lenth: Any lenth based on the customer's requirement.
pipe: 1mm to 1300mm
pipe Fitting Size:1/8" -96"
Flange Size:1/8" -96"
Lenth: Any lenth based on the customer's requirement.
ISO TC70
Yaang supply domestic and overseas customers with ISO TC70 steel plate, ISO TC70 steel pipe,ISO TC70 flange,ISO TC70 pipe fitting. Through many years' production experiences,we strictly control ISO TC70 chemical composition and mechanical properties From casting, flanges, rolling, heat treatment, etc. We have advanced precision machining equipments with a higher productioncapacity,bringinga best service and affordable prices to customersfrom all over the world.
We will serve you with honesty, integrity, and professionality.
Specific feature is as follows:
Chemical composition - Carbon tool steel
Steel grade: ISO TC70
C(％): 0.65～0.75
Si(％): 0.10～0.30
Mn(％): 0.10～0.40
P(％)≤: 0.030
S(％)≤: 0.030
Hardness and heat treatment
Hardness after annealing HBW≤HBW: 183
Quenching temperature /(℃±10℃): 800
Quenching medium : water
Quenching temperature /(℃±10℃): 800
Quenching medium : water
Tempering temperature /(℃±10℃): 180
Hardness after tempering ≥HRC: 57
Hardness after tempering ≥HRC: 57
Main feature and application
Carbon tool steel: carbon content ranging from 0.65% ~ 1.35%, is widely used in the field of manufacturing the cutting tools,mold steel,measuring implement. Compared with alloy tool steel,it has good machinability, low cost, wide application with large use levels in the manufacturing tools.
Category
Carbon tool steel is divided into carbon cutting tool steel, carbon mold steel and carbon measuring implement steel. Carbon cutting tool steel are for fabricating the cutting tool, carbon mold steel is for making the cold/hot working die steel and carbon measuring implement steel is for manufacturing the measuring tools.
Annealing process
Carbon tool steel is general deliveried in the condition of annealing and also for un-annealing according to demander's requirement.
Quenching process
Compared with alloy tool steel, the hardenability of carbon tool steel is lower, and diameter of through hardening in the Water is 15mm and only 5mm in the oil, further, this type of steel has a lower thermohardening, the hardness and abrasion resistance will drop quickly under the working temperature above 250℃, and also its cutting ability. Therefore,this type of steel is only for processing the tools in small size, simple form, low cutting speed, and normal working temperature.
Main feature and application field – alloy tool steel
Alloy tool steel is widely used to produce the cutting tool, cold/heat distortion mould and measuring implement. and further to manufacture the piston, valve, valve seat of fuel pump of diesel engine.
Object classification
The hardening capacity, hardenability, abrasive resistance and toughness of alloy tool steel are superior to carbon tool steel,it roughly divides into cutting tool, mould steel, measuring implement steel according to its application. The high-carbon content steel (carbon mass fraction is over 0.080% ) is used to process the cutting tool, measuring implement and cold work die. the hardness is over HRC60 after quenching. and has enough abrasive resistance. The steel of medium carbon content (mass fraction 0.35%~ 070%) is generally used to make the hot working die, low speed cutting tools ( woodworking tool, benchwork tool, drill, milling cutter) and measuring implements (caliper, micrometer, block gauge, sample plale). Measuring and cutting tool steel should have high hardness (62~65HRC),high abrasive resistance, enough obdurability, hothardness. The measuring and cutting tool steel also should require excellent dimensional stability in order for a higher precision.
Cold work die includes cold punching mould, wire-drawing die, drawing die, coining die, thread rolling die, cold heading die, cold extrusion die, Based on the working condition, cold work die should have the high hardness, strength, abrasion resistance, toughness, hardenability, quenching degree, and other processing property. This kind of alloy tool steel belongs to high carbon alloy steel (carbon mass fraction is over 0.80%), Chromium is key element of alloy with mass fraction below 5% generally.
Hot-working die divides into several main types, such as hammer flanges, die flanges, extrusion and die casting, including hot flanges die, press machine flanges die, stamping die, hot-extrusion die, metal die-casting mould. Heat distortion mould not only supports huge mechanical stress, but also thermal stress during working repeatedly. Hot-work die steel should have not only high hardness, red hardness, abrasion resistance, toughness, but also have excellent high temperature strength, thermal fatigue stability, thermal conductivity, upper hardenability for guaranteeing the whole cross section with consistent mechanical property
Plastic mold includes thermoplastic plastic mould and thermosetting plastic mold. Plastic mould steel requires the properties of definite strength, hardness, abrasion resistance, heat stability and corrosion resistance. And further requires excellent manufacturability, such as processability, corrosion resistance, grindability, polishing, repair welding, roughness, thermal conductivity, shape stability.
Heat treatment
The preheating of measuring and cutting tool steel is spheroidizing annealing, final heat treatment is quenching + low temperature tempering and hardness after heat treatment can reach 60~65HRC.
Alloy tool steel is widely used to produce the cutting tool, cold/heat distortion mould and measuring implement. and further to manufacture the piston, valve, valve seat of fuel pump of diesel engine.
Object classification
The hardening capacity, hardenability, abrasive resistance and toughness of alloy tool steel are superior to carbon tool steel,it roughly divides into cutting tool, mould steel, measuring implement steel according to its application. The high-carbon content steel (carbon mass fraction is over 0.080% ) is used to process the cutting tool, measuring implement and cold work die. the hardness is over HRC60 after quenching. and has enough abrasive resistance. The steel of medium carbon content (mass fraction 0.35%~ 070%) is generally used to make the hot working die, low speed cutting tools ( woodworking tool, benchwork tool, drill, milling cutter) and measuring implements (caliper, micrometer, block gauge, sample plale). Measuring and cutting tool steel should have high hardness (62~65HRC),high abrasive resistance, enough obdurability, hothardness. The measuring and cutting tool steel also should require excellent dimensional stability in order for a higher precision.
Cold work die includes cold punching mould, wire-drawing die, drawing die, coining die, thread rolling die, cold heading die, cold extrusion die, Based on the working condition, cold work die should have the high hardness, strength, abrasion resistance, toughness, hardenability, quenching degree, and other processing property. This kind of alloy tool steel belongs to high carbon alloy steel (carbon mass fraction is over 0.80%), Chromium is key element of alloy with mass fraction below 5% generally.
Hot-working die divides into several main types, such as hammer flanges, die flanges, extrusion and die casting, including hot flanges die, press machine flanges die, stamping die, hot-extrusion die, metal die-casting mould. Heat distortion mould not only supports huge mechanical stress, but also thermal stress during working repeatedly. Hot-work die steel should have not only high hardness, red hardness, abrasion resistance, toughness, but also have excellent high temperature strength, thermal fatigue stability, thermal conductivity, upper hardenability for guaranteeing the whole cross section with consistent mechanical property
Plastic mold includes thermoplastic plastic mould and thermosetting plastic mold. Plastic mould steel requires the properties of definite strength, hardness, abrasion resistance, heat stability and corrosion resistance. And further requires excellent manufacturability, such as processability, corrosion resistance, grindability, polishing, repair welding, roughness, thermal conductivity, shape stability.
Heat treatment
The preheating of measuring and cutting tool steel is spheroidizing annealing, final heat treatment is quenching + low temperature tempering and hardness after heat treatment can reach 60~65HRC.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirement.
Excellent service for all kinds of industries with advantages of technologies, equipments and affordable price.
Related hot word search:ISO TC70 Valve ISO TC70,flanges ISO TC70,ISO TC70 sheet,tee ISO TC70,ISO TC70 angle bar,pipe ISO TC70,ISO TC70 pipe fittings
Month Top
- 7ST40E
- 5STELLITE NO.6
- 51.2884
- 41.2083
- 480CrV2
- 4ASP 2052
- 41.2516
- 473WCrMoV2-2
- 41.2838
- 41.2342
