News
Credibility ,Excellent resistance to oxidation under mildly cyclic conditions through 2000°F characterizes 310 Stainless steel. Because of its high chromium and medium nickel contents, 310 Stainless steel has good resistance to sulfidation and other forms of hot corrosion. 310 is widely used in moderately carburizing atmospheres such as encountered in petrochemical environments. 310 is not suggested for the severe thermal shock of repeated liquid quenching.
Often in many product forms, the grain size and carbon content can meet both the Stainless steel 310S and Stainless steel 310H requirements. 310 Stainless steel is often used at cryogenic temperatures, with excellent toughness to -450°F, and low magnetic permeability. 310 Stainless steel has a machinability rating of 42% relative to AISI B1112 steel. When using high speed steel tooling, this equates to about 70 surface feet per minute. Forming operations should be performed at room temperature whenever possible.
Cr | Ni | C | Si | Mn | P | S | Mo | Cu | Fe | |
---|---|---|---|---|---|---|---|---|---|---|
MIN | 24.0 | 19.0 | - | - | - | - | - | - | - | - |
MAX | 26.0 | 22.0 | 0.08 | 0.75* | 2.0 | 0.045 | 0.03 | 0.75 | 0.5 | Balance |
310 Stainless steel bar, 310 Stainless steel Pipes, 310 Stainless steel Plate, 310 Stainless steel pipe fittings,
310 Stainless steel flanges, 310 Stainless steel tubes, 310 Stainless steel Welding Products.
Density: 0.284 lb/inch3
Melting Point: 2470 - 2555°F
Temperature, °F | 70 | 1000 | 1200 | 1400 | 1600 | 1800 | 2000 |
Coefficient* of Thermal Expansion, in/in°F x 10-6 | - | 9.5 | 9.8 | 10.05 | 10.15 | 10.3 | 10.6 |
Thermal Conductivity Btu • ft/ft2 • hr • °F |
7.6 | 13.6 | 15.2 | 16.8 | 18.4 | 20.0 | - |
Modulus of Elasticity, Dynamic psi x 106 | 29.0 | 23.0 | 21.8 | 20.5 | 19.2 | - | - |
Representative Tensile Properties
Temperature, °F | 10 | 1000 | 1200 | 1400 | 1600 |
Ultimate Tensile Strength, ksi | 80.0 | 67.8 | 54.1 | 35.1 | 19.1 |
0.2% Yield Strength, ksi | 35.0 | 20.8 | 20.7 | 19.3 | 12.2 |
Elongation, % | 52 | 47 | 43 | 46 | 48 |
Typical Creep- Rupture Properties
Temperature, °F | 1200 | 1400 | 1600 | 1800 |
Minimum Creep 0.0001%/Hr, ksi | 14.9 | 3.3 | 1.1 | 0.28 |
10,000 Hour Rupture Strength, ksi | 14.4 | 4.5 | 1.5 | 0.66 |
Do you have any other questions about 310 Stainless steel ? If you have any questions or need anything, be sure to give us a call at +86-18267732328 or visit our website:https://www.yaang.com.
Tel No:+86-18267732328 / Email:[email protected]
Address:Longwan District, Wenzhou, Zhejiang Province, China.
Copyright Notice © www.yaang.com Yaang Pipe Industry Co., Limited All rights reserved.
Yaang Pipe Industry Co., Ltd. is an international supplier of piping solutions for flange, butt welding fittings, socket welding fittings and threaded fittings. Our products are widely used in different industrial fields, including oil and gas, chemical industry, petrochemical industry, power plant, pulp and paper industry, environmental and water conservancy engineering, engineering projects, etc.