- SITEMAP
- CONTACT US
- 8618267732328
News
Credibility ,the lifeblood of enterprise!
- Fittings
- Butt Welding Fittings
- Forged Fittings
- 180 Degree Elbows
- 90 Degree Elbows
- 60 Degree Elbows
- 45 Degree Elbows
- 30 Degree Elbows
- Equal Tee
- Reducing Tee
- Concentric Reducer
- Eccentric Reducer
- Lap Joint Stub End
- Outlets
- Cap
- Bend
- Cross
- Coupling
- Stainless Steel Lateral Tee
- Bellows Expansion Joints
- Flexible Metal Hose
- Non-Standard/Custom Fittings
- Bleed & Flushing Rings
- Types of Flanges
- Anchor Flanges
- Blind Flanges
- Expander Flanges
- High Hub Flanges
- Lap Joint Flanges
- Long Weld Neck Flanges
- Nipoflanges
- Orifice Flanges
- Plate Flanges
- Ring Type Joint Flanges
- Reducing Flanges
- Slip On Flanges
- Socket Weld Flanges
- Spectacle Blind Flanges
- Square Flanges
- Spades & Ring Spacers
- Threaded Flanges
- Welding Neck Flanges
321/321H
| Type | Seamless & Welded Pipe | Butt Weld Fittings | Flanges & Pressure Fittings |
| Sizes | 1/4" thru 16" | 1/2" thru 12" | All descriptions |
| Schedules | Sch 10, 40, 80, 160, & XXH | Sch 10, 40, 80, 160, & XXH |
ASTM Standards
| Bar | Butt Weld Fittings | Forgings | Pipe, Welded & Seamless | Tube, Welded | Tube, Seamless | Plate |
| A276, A479 | A403 | A182 | A312 | A249 | A213 | A240 |
Minimum Physical Properties
| Tensile Strength | Yield Strength |
| 75 KSI Min. | 30 KSI Min. |
Chemical Composition (wt%)
| C | Mn | P | S | Si | Ni | Cr | Fe | Cb&Ta |
| 0.04 - 0.08 | 2.00 Max | 0.04 Max | 0.03 Max | 0.75 Max | 9.0 - 13.0 | 17.0 - 20.0 | Balance | 0.2 - 0.6 |
Properties
321 and 347 are austenitic stainless steels that contain stabilizing elements. Both alloys are easily welded. Annealing is not required after welding unless stress relief is desired. Both grades have excellent resistance to oxidation and corrosion. With high creep strength, these alloys work best up to 1600 degF. The addition of titanium in 321, and columbium plus tantalum in 347 give some desired characteristics:
* Prevents harmful carbide precipitation in the heat affected zone (HAZ) of the weld area
* Imparts substantial immunity to intergranular corrosion
* Reduced embrittlement in the HAZ of the weld area
Applications
Both alloys are common to the petroleum refining industries: they are used to make radiant superheaters, boiler tubes, high pressure steam pipes, and general refinery piping. They are also used for heavy duty exhaust systems and manifolds.
Tel No：+86-18267732328 / Email:[email protected]
Address：Longwan District, Wenzhou, Zhejiang Province, China.
Copyright Notice © www.yaang.com Yaang Pipe Industry Co., Limited All rights reserved.
Yaang Pipe Industry Co., Ltd. is an international supplier of piping solutions for flange, butt welding fittings, socket welding fittings and threaded fittings. Our products are widely used in different industrial fields, including oil and gas, chemical industry, petrochemical industry, power plant, pulp and paper industry, environmental and water conservancy engineering, engineering projects, etc.
