Corrosion Resistance of Stainless Steel Tubes By yaang.com

Carbon steel suffer from 'general' corrosion, where large areas of the surface are affected. Stainless steel tubes in the passive state are normally protected against this form of attack, however, localised forms of attack can occur and result in corrosionproblems.

The assessment of corrosion resistance in any particular environment, therefore, usually involves a consideration of specificcorrosion mechanisms.
These mechanisms are principally:

Localised corrosion is often associated with chloride ions in aqueous environments. Acidic conditions (low PH) and increases in temperature all contribute to localised mechanisms of crevice corrosion and pitting corrosion. The addition of tensile strength, whether applied by loading or from residual stress, provides the conditions for stress corrosion cracking (SCC). These mechanisms are all associated with a localised breakdown of the passive layer. A good supply of oxygen to all surfaceof the steel is essential to maintaining the passive layer but higher levels of chromium, nickel, molybdenum & nitrogen all help in their individual ways to prevent these forms of attack.

As a general rule increased corrosion resistance can be expected by moving through the grades:

Duplex stainless steel grade such as 2205 (1.4462/S31803) are specifically designed to combat SCC by 'balancing' the structure to increase its strength, but additionally molybdenum and nitrogen enhance the pitting resistance, which in turn has the additional benefit in improving their SCC resistance.

Source: Yaang Pipe Industry Co., Limited (www.yaang.com)