- SITEMAP
- CONTACT US
- 8618267732328
News
Credibility ,the lifeblood of enterprise!
- Fittings
- Butt Welding Fittings
- Forged Fittings
- 180 Degree Elbows
- 90 Degree Elbows
- 60 Degree Elbows
- 45 Degree Elbows
- 30 Degree Elbows
- Equal Tee
- Reducing Tee
- Concentric Reducer
- Eccentric Reducer
- Lap Joint Stub End
- Outlets
- Cap
- Bend
- Cross
- Coupling
- Stainless Steel Lateral Tee
- Bellows Expansion Joints
- Flexible Metal Hose
- Non-Standard/Custom Fittings
- Bleed & Flushing Rings
- Types of Flanges
- Anchor Flanges
- Blind Flanges
- Expander Flanges
- High Hub Flanges
- Lap Joint Flanges
- Long Weld Neck Flanges
- Nipoflanges
- Orifice Flanges
- Plate Flanges
- Ring Type Joint Flanges
- Reducing Flanges
- Slip On Flanges
- Socket Weld Flanges
- Spectacle Blind Flanges
- Square Flanges
- Spades & Ring Spacers
- Threaded Flanges
- Welding Neck Flanges
Corrosion Resistant Material By yaang.com
In normal mechanical and structural engineering design materials are selected primarily for their mechanical properties-corrosion is not an important criteria. The systems are generally protected against corrosion by surface coatings. Most machines are located indoors and are accessible for inspection and maintenance. The exceptions to this are machines used for construction and agriculture. These machines may well be used in corrosive environments but they are generally regularly maintained and some level of corrosion is acceptable.
In process engineering corrosion is a very important design factor and material are selected primarily on their corrosion resistance properties. Surface coatings are often not considered because of the risk of contaminating the process stream.
Ratings 0 = Unsuitable, 1 = poor, 2 = Fair, 3 =Fair to Good, 4 good, 5 = good to excellent, 6= excellent.
| Fresh Water | Sea Water |
Steam | Steam Cond'te |
Air | |
| Metal | Static/Turb | Static/Turb | Dry | Wet | City/Indust |
| Grey Cast Iron- Plain or Low Alloy |
4/3 | 4/3 | 4 | 4 | 3 |
| Ductile Iron (High Strength ) |
4/4 | 4/2 | 4 | 4 | 3 |
| Cast Iron Ni_Resist. (14% Ni, 7% Cu, 2% Cr bal Fe) |
5/5 | 5/5 | 5 | 5 | 4 |
| Ductile Iron Ni_Resist. (24 % Ni, bal Fe) |
5/5 | 5/5 | 5 | 5 | 4 |
| Mild Steel- Low Alloy steels | 4/3 | 4/2 | 4 | 4 | 3 |
| Stainless Steel Ferritic (17% Cro) |
4/6 | 1/4 | 6 | 5 | 3 |
| Stainless Steel Austenitic (18% Cro ,8% Ni ) |
6/6 | 2/5 | 6 | 5 | 4 |
| Stainless Steel Austenitic (18% Cro 12% Ni, 2.5% Mo ) |
6/6 | 3/5 | 6 | 6 | 6 |
| Stainless Steel Austenitic (20% Cro 29% Ni, 2.5% Mo,3.5% Cu ) |
6/6 | 4/6 | 6 | 6 | 6 |
| Hastelloy Alloy (55% Ni, 17% Mo,16% Cr, 6% Fe, 4% W) |
6/6 | 6/6 | 6 | 6 | 6 |
| Inconel (78% ni,15% Cr, 7% Fe) |
6/6 | 4/6 | 6 | 6 | 6 |
| Copper Nickel alloys (Up to 30% Ni) |
6/6 | 6/6 | 5 | 6 | 5 |
| Monel 400 (66% Ni, 30% Cu, 4% Si) |
6/6 | 6/6 | 6 | 6 | 5 |
| Nickel Commercial (99% Ni) |
3/5 | 6/6 | 6 | 6 | 4 |
| Copper and Silicon Bronze | 6/5 | 4/1 | 5 | 6 | 5 |
| Aluminium Brass | 6/6 | 4/5 | 5 | 6 | 5 |
| Bronze (88% Cu,5% Sn,5% Ni,2% Zn) |
6/6 | 5/5 | 5 | 6 | 5 |
| Aluminium Alloys | 4/5 | 0-5/4 | 2 | 5 | 5 |
| Lead (Chemical or antimonial) | 6/5 | 5/3 | 0 | 2 | 5 |
| Silver | 6/6 | 5/5 | 5 | 6 | 6 |
| Titanium | 6/6 | 6/6 | 5 | 6 | 6 |
| Zirconium | 6/6 | 6/6 | 5 | 6 | 6 |
Tel No：+86-18267732328 / Email:[email protected]
Address：Longwan District, Wenzhou, Zhejiang Province, China.
Copyright Notice © www.yaang.com Yaang Pipe Industry Co., Limited All rights reserved.
Yaang Pipe Industry Co., Ltd. is an international supplier of piping solutions for flange, butt welding fittings, socket welding fittings and threaded fittings. Our products are widely used in different industrial fields, including oil and gas, chemical industry, petrochemical industry, power plant, pulp and paper industry, environmental and water conservancy engineering, engineering projects, etc.
