- 13MnNi6-3 Valve
- 13MnNi6-3 Flange
- 13MnNi6-3 pipe fitting
- 13MnNi6-3 angle bar
- 13MnNi6-3 pipe
13MnNi6-3
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.16 | 0.50 | 0.85-1.70 | 0.025 | 0.015 | 0.30-0.85 | |
Mo | Al | Cu | Nb | Ti | V | Ce |
≥ | 0.020≤ 0.05 | ≤ 0.05 | ||||
N | Co | Pb | B | Other | ||
German DIN of low-temperature steel Number and chemical composition
Number (1) : 13 MnNi6-3
Materials, W-Nr. : 1.6217
C (%) : more than 0.16
Si (%) : more than 0.50
Mn (%) : 0.85 ~ 1.70
P (%) than: 0.025
S (%) than: 0.015
Cr (%) :-
Ni (%) : 0.30 ~ 0.85
V (%) : more than 0.05
Other (%) : 0.05 Al acurity of 0.020 or better than Nb
The hot working temperature / ℃ : 1100 ~ 850
Heat treatment temperature / ℃ | is fire: 880 ~ 940
Heat treatment temperature / ℃ | quenching:
Heat treatment temperature / ℃ | tempering: 580 ~ 640
Normal temperature and low temperature mechanical properties | state: at room temperature
Normal temperature and low temperature mechanical properties | σ b/MPa: 490 ~ 610
Normal temperature and low temperature mechanical properties | σ s frequency/MPa: 345
Normal temperature and low temperature mechanical properties | δ 5 (%) frequency: 22
Normal temperature and low temperature mechanical properties | ψ (%) frequency:--
Normal temperature and low temperature mechanical properties | AKV (DVM) / J: 65
The main Alloy steel elements have silicon, manganese, chromium, nickel, tungsten, molybdenum, vanadium, titanium, niobium and zirconium, cobalt, aluminum, copper, boron, rare earth, etc. Which vanadium, titanium, niobium and zirconium, etc in steel is strong carbide form elements, as long as there is enough carbon, in the right conditions, to shape their own carbide, when lack of carbon or in high temperature conditions, the one with atomic state into the crystallology; Mn, chromium, tungsten, molybdenum carbide form elements for, some of the atoms in the state to enter the crystallology, another part of form replacement type alloy cementite; Aluminum, copper, nickel, cobalt, silicon carbide is not formed elements, general with atomic state exists in the crystallology. Free cutting steel: in steel join a certain number of one or more than one type of sulphur, phosphorus, lead, calcium, selenium, tellurium and cutting elements to improve its cutting sex of alloy. Also called the automatic machine processing steel, hereinafter referred to as automatic steel. This kind of steel can use high cutting speed and large cutting depth cutting processing. Because of the free cutting steel join element, make steel cutting resistance decreased, and cutting element characteristics of itself and by the formation of the compounds for lubrication cutting tool role, brittle flocks, reducing wear and thus reduce the workpiece surface roughness and the tool life and improve the production efficiency. Spring steel is mainly have good elasticity, and because it is in the dynamic loading environment conditions of the job, so to make the material of spring the main should have high yield strength; Under heavy load in does not cause the plastic deformation; Should have high fatigue strength, load under the action of repeated in with long service life; And have enough toughness and plastic, in case in the impact a role brittle fracture.
Introduction to Our Products:
Specialized high quality steel
We have the advantages of equipment, technologies and price
Specifications:
Valve:
Diameter : 1mm-1300mm
Steel pipe:
Size:
OD: 9.5mm - 813mm
WT: 0.8mm - 34mm
Length: 1 - 13m, also can be customed.
Items |
seamless pipe & tube, pipe & tube |
|||
Standard |
ASTM, GB, DIN, AISI, etc |
|||
Outer Diameter |
Round pipe9.5mm--813mm |
|||
square |
12.7x12.7--200X200mm |
|||
rectangular |
20X40--150X200mm |
|||
Thickness |
0.8mm - 34mm |
|||
Length |
5.8m,6m, or as customers' request |
|||
Tolerance |
a) Outer Diameter: +/- 0.2mm |
|||
b) Thickness: +/- 0.02mm |
||||
c) Length: +/- 5mm |
||||
Surface |
180Grit, 320Grit, 400Grit Satin / Hairline |
|||
400Grit, 500Grit, 600Grit Mirror finish |
||||
Application |
Widely used in petroleum, Foodstuff, chemical industry, construction, electric power, nuclear energy, biotechnology, machinery, papermaking, shipbuilding, boiler fields, etc |
Pipe fitting:
Size: 1/8 inch - 80 inch (DN6 - DN2000) WT: Sch5s - Sch160XXS
Items |
Elbow,Equal Tee,Reducer Tee,Concentric Reducer,Eccentric Reducer,Cap,etc |
|
Standard |
ASME |
ANSI B16.9,ANSI B16.28,MSS-SP-75 |
DIN |
DIN2605,DIN2615, DIN2616, DIN2617, DIN28011 |
|
SGP |
JISB2313 |
|
EN |
EN10253-1 EN10253-2 |
|
Material |
ASME |
A234 WPB,A234 WP1,A234 WP5,A234,WP9, A234 WPB11,A234 WPB12,A234 WPB22,WP91, A420,WPHY42,WPHY52,WPHY60,WPHY65, WPHY70,WP304,WP304L,WP304H,WP316, WP316L,WP321,WP347,WP347H |
DIN |
ST37.0,ST35.8,ST45.8,S235JR,P235GH,P265GH, 10CrMo910,15CrMo,12Cr1MoV |
|
JIS |
JIS G3454,STPG370,TPG410 |
|
Surface |
Black paint/bright paint/Galvanized |
|
Marking |
As customer’s requirements |
Flange:
Product Name | Flange | |
Items | Plate, Welding Neck, Slip on, Blind, Lap joint, Threaded Flange | |
Standard | ANSI | ANSI B16.5 ASME B16.47 series A/B |
DIN | DIN | |
GOST | GOST 12820-80 | |
EN | EN1092-1:2002 | |
JIS | JIS B2220-2004, KS D3576, KS B6216 KS B1511-2007 JIS B2261; JIS B8210 | |
BS | BS4504 BS10 Table D/E | |
Material | ANSI | CS A105/SA 105NSS 304/304L, 316/316L Alloy Steel: WHPY45/52/65/80 |
DIN | CS RST37.2;S235JR SS 304/304L,316/316L | |
GOST | CS CT20;16MN;SS 304/304L,316/316L | |
EN | CS RST37.2;S235JR;C22.8SS 304/304L,316/316L | |
JIS | SS400,SF440 SS 304/304L, 316/316L | |
BS | CSRST37.2;S235JR;C22.8;Q235SS 304/304L,316/316L | |
Pressure | ANSI | Class 150, 300, 600, 900, 1500 2500lbs |
DIN | PN6,PN10,PN16,PN25,PN40,PN64,PN100 | |
GOST | PN6,PN10,PN16,PN25 | |
EN | PN6,PN10,PN16,PN25,PN40,PN64,PN100 | |
JIS | 1K,2K,5K,10K,16K,20K,30K,40K | |
BS | PN6,PN10,PN16,PN25,PN40,PN64,PN100 | |
Size | ANSI | 1/2” – 60” |
DIN | DN15-DN2000 | |
GOST | DN15-DN1600 | |
EN | DN15-DN2000 | |
JIS | 15A-1500A | |
BS | DN15-DN2000 | |
Coating | varnish, yellow paint, anti-rust oil, galvanizing etc | |
Usage | Used for the connection of all kinds of pipeline. | |
to convey the water, steam, air, gas and oil |
Lenth: Any lenth based on the customer's requirement.
Mechanical properties
Heat treatment
Machining
Welding performance
Related hot word search:ViTa llium ViTa llium tube plate, flat steel,sheet,coil,steel wire,round rods, ViTa llium Strip
Related hot word search:13MnNi6-3 Valve 13MnNi6-3,forging 13MnNi6-3,13MnNi6-3 tube sheet,elbow 13MnNi6-3,13MnNi6-3 flat bar,pipe 13MnNi6-3,13MnNi6-3 Tee