- 20Mn6 Valve
- 20Mn6 Flange
- 20Mn6 pipe fitting
- 20Mn6 angle bar
- 20Mn6 pipe
20Mn6
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.17-0.23 | 0.30-0.60 | 1.30-1.60 | 0.035 | 0.035 | ||
Mo | Al | Cu | Nb | Ti | V | Ce |
N | Co | Pb | B | Other | ||
Cold die 1, exported approximate of Y12 sulphur phosphorous composite low carbon free cutting steel, is the existing free cutting steel phosphorus in the most in a material. Often used in the manufacture of a mechanical performance requirements not all kinds of high machines and instrumentation parts, such as bolts, nuts, pins, shaft, pipe joints and so on.
2, Y12Pb lead free cutting steel, cutting machining well, does not exist on the performance of the directional and have higher mechanical properties, often used in the manufacture of more important mechanical parts, precision instrument parts, etc.
3, Y15 compound high sulfur low silicon free cutting steel, is our country developed by the success of the steel, cutting sex than exported approximate of Y12 to steel, often used to make not important standard parts, such as bolts, nuts, tube fittings, spring seat, etc.
4, Y15Pb with Y12Pb, cutting machining better.
5, Y20 low sulphur phosphorous composite free cutting steel, cutting machining better than 20 steel and less than 12 steel, carburizing processing, often used for manufacturing requirement surface hard, heart of high toughness of instrument and meter, and axis of wear parts.
6, Y30 low sulphur phosphorous composite free cutting steel, high mechanical properties, cutting machining also have appropriate improve, but manufacturing strength to demand higher standard parts.
7, Y35 with Y30 steel, adjustable quality processing.
8, Y40Mn high sulfur carbon free cutting steel, high strength, hardness and good cutting machining, and is suitable for processing requirements of high rigidity machine tool parts, such as machine tools ball screw, light poles, spline shaft, rack, etc.
9, Y45Ca calcium sulfur compound free cutting steel, cutting sex not only, and after heat treatment with good mechanical properties, is suitable for the manufacture of more important machine parts, such as machine tools gear axle spline shaft, tractor drive shaft, etc. "Mechanical properties: impact toughness values α kv (J/cm2) : frequency 69 (7) hardness: annealing or high temperature tempering, than 207 HB, diameter of 4.2 mm creasing quartile sample size: sample blank dimensions for 15 mm standard and metallographic organization" heat treatment, heat treatment specification: is fire, 930 ~ 950 ℃, air cold; Quenching, 860 + 20 ℃, oil cold; Tempering, 200 + 20 ℃, air or water. "Delivery status: rolling or forging system state delivery. According to buyer's request can also heat treatment (is fire, annealed or high temperature tempering) state delivery. Delivery status should be indicated in the contract.
th: Any lenth based on the customer's requirement.
Mechanical properties
Heat treatment
Machining
Welding performance
Related hot word search: ViTa llium tube plate, flat steel,sheet,coil,steel wire,round rods, ViTa llium Strip
ELECTRODE ARC FURNACE; (NON)VACUUM INDUCTION FURNACE; LF; VD; VOD; ESR; CONSUMABLE ELECTRODE VACUUM FURNACE.Related hot word search:20Mn6 Valve 20Mn6,forging 20Mn6,20Mn6 tube sheet,elbow 20Mn6,20Mn6 flat bar,pipe 20Mn6,20Mn6 Tee