- 24Ni8 Valve
- 24Ni8 Flange
- 24Ni8 pipe fitting
- 24Ni8 angle bar
- 24Ni8 pipe
24Ni8
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
---|---|---|---|---|---|---|
0.20-0.28 | 0.15-0.35 | 0.60-0.80 | 0.035 | 0.035 | ≤ 0.30 | 1.90-2.20 |
Mo | Al | Cu | Nb | Ti | V | Ce |
N | Co | Pb | B | Other | ||
(1) the hot working temperature / ℃ : 1100 ~ 850
Heat treatment temperature / ℃ | is fire: 850 ~ 880
Heat treatment temperature / ℃ | quenching: 830 ~ 880 water or oil
Heat treatment temperature / ℃ | tempering: 500 ~ 650
Normal temperature and low temperature mechanical properties | state: at room temperature
Normal temperature and low temperature mechanical properties | σ b/MPa: 590 ~ 740
Normal temperature and low temperature mechanical properties | σ s frequency/MPa: 410
Normal temperature and low temperature mechanical properties | δ 5 (%) frequency: 20
Normal temperature and low temperature mechanical properties | ψ (%) frequency: 55
Normal temperature and low temperature mechanical properties | AKV (DVM) / J: 96
German DIN of low-temperature steel Number and chemical composition
Material name: ensure that its quench-hardening ability structural steel grades: 20 MnTiBHA standard GB/T 5216-1985 "chemical ingredients: carbon C: 0.17 ~ 0.23 Si Si: 0.17 ~ 0.37 Mn Mn: 1.20 ~ 1.55 sulfur S: allow residual content than 0.030 P P: allow residual content than 0.030 chromium Cr: allow residual content than 0.035 Ni Ni: allow residual content than 0.030 copper Cu: allow residual content than 0.025 titanium Ti: 0.04 ~ 0.10 B B: 0.0005 ~ 0.0035" mechanical properties: impact toughness values α kv (J/cm2) : frequency 69 (7) hardness: annealing or high temperature tempering, than 187 HB, diameter of 4.4 mm creasing quartile sample size: sample blank dimensions for 15 mm standard and metallographic organization "heat treatment, heat treatment specification: is fire, 930 ~ 950 ℃, air cold; Quenching, 860 + 20 ℃, oil cold; Tempering, 200 + 20 ℃, air or water. "Delivery status: rolling or forging system state delivery. According to buyer's request can also heat treatment (is fire, annealed or high temperature tempering) state delivery. Delivery status should be indicated in the contract.
Mechanical properties
Heat treatment
Machining
Welding performance
Related hot word search:ViTa llium ViTa llium tube plate, flat steel,sheet,coil,steel wire,round rods, ViTa llium Strip
Related hot word search:24Ni8 Valve 24Ni8,forging 24Ni8,24Ni8 tube sheet,elbow 24Ni8,24Ni8 flat bar,pipe 24Ni8,24Ni8 Tee