- ALLOY 601 Valve
- ALLOY 601 Flange
- ALLOY 601 pipe fitting
- ALLOY 601 angle bar
- ALLOY 601 pipe
ALLOY 601
ALLOY 601 angle bars, ALLOY 601 flanges, Pipe Fitting, Steel Pipe, Heat Exchanger and Reducer, Gasket, Tee, Pipe Fitting, Tube Plate, have all specifications. With many yeas production experience, strict control ALLOY 601 chemical composition and ALLOY 601 mechanical properties.
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Angle bar: 1mm to 1300mm
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
|
Grade :
|
|
|
Number:
|
2.4851
|
|
Standard:
|
EN 10095 : 1999 Heat Resisting Steels and Nickel Alloys
|
|
Classification:
|
Austenitic nickel alloy
|
|
Equivalent grades:
|
No information
|
Chemical composition % of the ladle analysis of grade NiCr23Fe (2.4851)
|
A maximum of 1.5% Co is allowed and counted as nickel. Reporting of cobalt is not requred.
|
|
Fe
|
C
|
Si
|
Mn
|
Ni
|
P
|
S
|
Cr
|
Ti
|
Al
|
Cu
|
B
|
|
max 18
|
0.03 - 0.1
|
max 0.5
|
max 1
|
58 - 63
|
max 0.02
|
max 0.015
|
21 - 25
|
max 0.5
|
1 - 1.7
|
max 0.5
|
max 0.006
|
Product description:
Step Shaft 2.4851 Tube 2.4851 Pie-shaped 2.4851 Ring 2.4851 Module Large valves of the main 2.4851 Other Profiled forgings 2.4851
Special Steel classification:
Stainless steel, Hi-Steel HSLA-80, Mould steel, Heat resistant steel, Tool steel, Ball bearing steel,Spring steel, Alloy steel, Construction steel, Die steel, High-speed steel, angles, flanges, tube sheet, tee, welded pipes, seamless tubes
Standard:
Chinese GB, Japanese JIS, US ASTM, UK BS, EU DIN standards and so on.
Chinese GB, Japanese JIS, US ASTM, UK BS, EU DIN standards and so on.
Products Introduction:
Specifications
Valve:
Diameter : 1mm-2000mm
Diameter : 1mm-2000mm
Steel pipe:
Size: OD: 9.5mm - 813mm WT: 0.8mm - 34mm Length: 1 - 13m, also can be customed.
Size: OD: 9.5mm - 813mm WT: 0.8mm - 34mm Length: 1 - 13m, also can be customed.
Pipe fitting:
Size: 1/8 inch - 80 inch (DN6 - DN2000) WT: Sch5s - Sch160XXS
Size: 1/8 inch - 80 inch (DN6 - DN2000) WT: Sch5s - Sch160XXS
Flange:
Size: DN15-DN2000.
Size: DN15-DN2000.
Length: Any length based on the customer's requirement.
Similar brand: Inconel 601 (UNS N06601 / W.N r 2.4851), NS313, ALLOY 601, This company specialized production Inconel 601 / NS313 Pipe Fitting, Steel Pipe, seamless steel tube, steel flange, pipe tee, Reducer, gasket, Valve.
Inconel 601 / NS313, high temperature corrosion resistance, high temperature oxidation resistance especially, aqueous solution of corrosion good corrosion, good mechanical properties, easy to forming welding. This alloy has the following characteristics:
1. High temperatures have excellent oxidation resistance
2. Very good carbonation sex
3. Can be a very good oxidation resistance of sulfur atmosphere
4. At the room temperature, high temperature and when it has very good mechanical properties
5. Very good stress corrosion cracking resistance performance due to control the carbon content and grain size, 601 has high creep rupture strength, so in 500 ℃ above the recommended 601 field.
Inconel 601 metallographic structure:
601 for heart cubic lattice structure surface.
Inconel 601 resistance to corrosion: 601 alloy a important performance is as high as 1180 ℃ in temperature has oxidation resistance. Even in tough conditions, such as heating and cooling cycle, can create a dense layer of 601 the oxide film and get very high abrasion resistance in sex.
601 has the very good carbonation sex. Due to a higher chromium, aluminum content, 601 in high temperature sulfur atmosphere has the very good oxidation resistance Inconel 601 is designed for heat treatment equipment, industrial furnace equipment, chemical heater, the condenser pipe combustion chamber, etc. Inconel 601 alloy is nickel-chromium-iron base alloy solid solution strengthening, good resistance to high temperature corrosion and oxidation resistance, excellent cold heat processing and welding performance, in 700 ℃ following with a satisfactory hot strong sex and high plastic deformation. Alloy can through the cold strengthened, also can use resistance welding, dissolve welding or soldering connections, suitalbe for making in 1100 ℃ under low load under the antioxidant parts.
German DIN of low-temperature steel Number and chemical composition
Material name: ensure that its quench-hardening ability structural steel grades: 20 MnTiBHA standard GB/T 5216-1985 "chemical ingredients: carbon C: 0.17 ~ 0.23 Si Si: 0.17 ~ 0.37 Mn Mn: 1.20 ~ 1.55 sulfur S: allow residual content than 0.030 P P: allow residual content than 0.030 chromium Cr: allow residual content than 0.035 Ni Ni: allow residual content than 0.030 copper Cu: allow residual content than 0.025 titanium Ti: 0.04 ~ 0.10 B B: 0.0005 ~ 0.0035" mechanical properties: impact toughness values α kv (J/cm2) : frequency 69 (7) hardness: annealing or high temperature tempering, than 187 HB, diameter of 4.4 mm creasing quartile sample size: sample blank dimensions for 15 mm standard and metallographic organization "heat treatment, heat treatment specification: is fire, 930 ~ 950 ℃, air cold; Quenching, 860 + 20 ℃, oil cold; Tempering, 200 + 20 ℃, air or water. "Delivery status: rolling or forging system state delivery. According to buyer's request can also heat treatment (is fire, annealed or high temperature tempering) state delivery. Delivery status should be indicated in the contract.
Mechanical properties
ViTa llium Mechanical properties,production completely according to the ViTa llium standards to meet the ViTa llium mechanical performance, can also according to the customer request, to meet the requirements of customers of ViTa llium mechanical properties.
Heat treatment
ViTa llium Heat treatment,production completely according to the ViTa llium standards to meet the ViTa llium Heat treatment, can also according to the customer request, to meet the requirements of customers of ViTa llium Heat treatment.
Machining
ViTa llium Machining,production completely according to the ViTa llium standards to meet the ViTa llium Machining, can also according to the customer request, to meet the requirements of customers of ViTa llium Machining.
Welding performance
ViTa llium Welding performance,production completely according to the ViTa llium standards to meet the ViTa llium Welding performance, can also according to the customer request, to meet the requirements of customers of ViTa llium Welding performance.
Related hot word search:ViTa llium ViTa llium tube plate, flat steel,sheet,coil,steel wire,round rods, ViTa llium Strip
Related hot word search:ALLOY 601 Valve ALLOY 601,forging ALLOY 601,ALLOY 601 tube sheet,elbow ALLOY 601,ALLOY 601 flat bar,pipe ALLOY 601,ALLOY 601 Tee