- AWS ER 2594 Valve
- AWS ER 2594 Flange
- AWS ER 2594 pipe fitting
- AWS ER 2594 Angle Bar
- AWS ER 2594 pipe
AWS ER 2594
AWS ER 2594 angle bars, AWS ER 2594 flanges, Pipe Fitting, Steel Pipe, Heat Exchanger and Reducer, Gasket, Tee, Pipe Fitting, Tube Plate, have all specifications. With many yeas production experience, strict control AWS ER 2594 chemical composition and AWS ER 2594 mechanical properties.
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Angle bar: 1mm to 1300mm
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
| Data Sheet: |
ER 2594 |
| Weight % | C | Cr | Ni | Mo | Mn | Si | P | S | N | Cu | W |
|
ER 2594 |
0.03 max |
24-27 |
8-10.5 |
2.5- 4.5 |
2.5 max |
1 max |
0.03 max |
0.02 max |
0.20- 0.30 |
1.5 max |
1.0 max |
Alloy ER 2594 is a superduplex welding wire. The Pitting Resistance Equivalent Number (PREN) is at least 40, thereby allowing the weld metal to be called a superduplex stainless steel. This welding wire provides matching chemistry and mechanical property characteristics to wrought superduplex alloys such as 2507 and Zeron 100 as well as superduplex casting alloys (ASTM A890). This welding wire is overalloyed 2-3 percent in Nickel to provide optimum ferrite/austenite ratio in the finished weld. This structure results in high tensile and yield strength along with superior resistance to SCC and pitting corrosion.
Set the parameters to obtain a heat input of 10,000 -30,000 Joules/inch. Pre-heat is not required. The interpass temperature should be maintained at 300ºF max. If post weld annealing is required this weld metal will require a higher annealing temperature than that required by the duplex base metal.
AVAILABILITY
Alloy ER 2594 is a stainless steel TIG, MIG and SUB-ARC wire used for welding.
SPECIFICATIONS
AWS 5.9
ASME SFA 5.9
AWS ER2594
UNS S32750
TYPICAL MECHANICAL PROPERTIES
| Material | Ultimate Tensile Strength (psi) | 0.2% Offset Yield Strength (psi) |
Elongation (%) |
| ER 2594 | 123,250 (850 MPa) | 94,250 (650 MPa) | 28 |
Related hot word search:AWS ER 2594 Valve AWS ER 2594 ,forging AWS ER 2594 ,AWS ER 2594 tube sheet,elbow AWS ER 2594 ,AWS ER 2594 flat bar,pipe AWS ER 2594 ,AWS ER 2594 Tee
Prev:450EMZ
Next:AWS A5.9 ER2594