- DA5816W Valve
- DA5816W Flange
- DA5816W pipe fitting
- DA5816W angle bar
- DA5816W pipe
DA5816W
DA5816W angle bars, DA5816W flanges, Pipe Fitting, Steel Pipe, Heat Exchanger and Reducer, Gasket, Tee, Pipe Fitting, Tube Plate, have all specifications. With many yeas production experience, strict control DA5816W chemical composition and DA5816W mechanical properties.
Production specification
Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials.
Angle bar: 1mm to 1300mm
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
Steel Pipe: 1 - 1300mm, also can be customed.
Pipe fitting Size: 1/8 inch - 80 inch (DN6 - DN2000)
Flange Size: DN6 - DN2000
Lenth: Any lenth based on the customer's requirement.
|
C ≤ |
Si ≤ |
Mn ≤ |
P ≤ |
S ≤ |
Cr | Ni |
|---|---|---|---|---|---|---|
| 0.12 | 0.9 | 0.3-1.4 | 0.04 | 0.03 | 0.45-0.75 | 0.05-0.7 |
| Mo | Al | Cu | Nb | Ti | V | Ce |
| 0.3-0.7 | ||||||
| N | Co | Pb | B | Other | ||
German DIN of low-temperature steel Number and chemical composition
Material name: ensure that its quench-hardening ability structural steel grades: 20 MnTiBHA standard GB/T 5216-1985 "chemical ingredients: carbon C: 0.17 ~ 0.23 Si Si: 0.17 ~ 0.37 Mn Mn: 1.20 ~ 1.55 sulfur S: allow residual content than 0.030 P P: allow residual content than 0.030 chromium Cr: allow residual content than 0.035 Ni Ni: allow residual content than 0.030 copper Cu: allow residual content than 0.025 titanium Ti: 0.04 ~ 0.10 B B: 0.0005 ~ 0.0035" mechanical properties: impact toughness values α kv (J/cm2) : frequency 69 (7) hardness: annealing or high temperature tempering, than 187 HB, diameter of 4.4 mm creasing quartile sample size: sample blank dimensions for 15 mm standard and metallographic organization "heat treatment, heat treatment specification: is fire, 930 ~ 950 ℃, air cold; Quenching, 860 + 20 ℃, oil cold; Tempering, 200 + 20 ℃, air or water. "Delivery status: rolling or forging system state delivery. According to buyer's request can also heat treatment (is fire, annealed or high temperature tempering) state delivery. Delivery status should be indicated in the contract.
Mechanical properties
ViTa llium Mechanical properties,production completely according to the ViTa llium standards to meet the ViTa llium mechanical performance, can also according to the customer request, to meet the requirements of customers of ViTa llium mechanical properties.
Heat treatment
ViTa llium Heat treatment,production completely according to the ViTa llium standards to meet the ViTa llium Heat treatment, can also according to the customer request, to meet the requirements of customers of ViTa llium Heat treatment.
Machining
ViTa llium Machining,production completely according to the ViTa llium standards to meet the ViTa llium Machining, can also according to the customer request, to meet the requirements of customers of ViTa llium Machining.
Welding performance
ViTa llium Welding performance,production completely according to the ViTa llium standards to meet the ViTa llium Welding performance, can also according to the customer request, to meet the requirements of customers of ViTa llium Welding performance.
Related hot word search:ViTa llium ViTa llium tube plate, flat steel,sheet,coil,steel wire,round rods, ViTa llium Strip
Related hot word search:DA5816W Valve DA5816W,forging DA5816W,DA5816W tube sheet,elbow DA5816W,DA5816W flat bar,pipe DA5816W,DA5816W Tee